Manual DeWalt DW274K T 2 (page 23 of 92) (English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Turkish, Spanish, Spanish, Norwegian)

548887

Zoom out

Zoom in

1/92

18 en - 5

ENGLISH

• To insert the accessory (e.g. a bit holder or

nutsetter) (7) push it into the holder (8) until it

snaps in place. Tap it lightly if required.

• To remove the accessory pull it out of the holder

using a pair of pliers.

• Reinstall the collar (4) by aligning the ribs (9) on

the inside of the collar (4) with the grooves (10) in

the clutch housing and snap the collar in place.

DW268K/DW269K (fig. A)

• Pull the ball retainer (5) to the front and hold it.

• Insert the accessory.

• Release the ball retainer.

Replacing the bit tip (fig. B)

• Simply pull out the bit tip (11). A pair of pliers may

be required.

DW263K/DW274K/DW274KN -

Setting the driving depth (fig. C)

The depth sensitive feature offers the following

advantages:

- the selected driving depth is repeatable for

structural integrity

- screws with sealing washers are driven correctly

so that no leaks occur

The driving depth is determined by the position of

the depth locator (5) in relation to the bit or socket.

The symbols on the collar indicate how to set the

driving depth.

• Turn the collar clockwise to increase the driving

depth.

• Turn the collar counterclockwise to decrease the

driving depth.

DW263K - When using a nutsetter

• For screws with sealing washers, turn the

adjustment collar until the end of the nutsetter is

flush with the end of the depth locator.

• If required, turn the collar until the nutsetter is

recessed approximately 2 mm into the depth

locator.

• Also refer to the screw manufacturer’s

specifications for the proper sealing washer

settings in different applications.

• Drive a screw into a waste piece and check the

distance between the washer and the material.

• Turn the collar (4) counterclockwise or clockwise

to decrease or increase the driving depth as

required.

• Drive another screw and readjust the collar (4)

until the desired setting is achieved.

DW263K - Replacing the depth locator (fig. D)

This model is supplied with two depth locators (5) to

accommodate different bits, holders, sockets and

adaptors.

• Pull the collar assembly off the tool.

• Hold the depth locator (5) and unscrew the collar (4).

• Replace the depth locator (5).

• To reassemble, proceed in reverse order.

DW268K/DW269K - Setting the torque (fig. A)

This model allows setting the torque for a wide

range of screws.

• To increase the torque, turn the torque

adjustment collar (4) counterclockwise.

• To decrease the torque, turn the torque

adjustment collar (4) clockwise.

• Drive a screw into a waste piece and check if the

screw is properly fastened.

• If the clutch ratchets unexpectedly (for example

when a wood knot is encountered),

simply increase the pressure on the tool.

Setting the direction of rotation (fig. E)

• Select forward or reverse rotation using the

forward/reverse switch (3) (see arrows on tool).

Always wait until the motor has come to

a complete standstill before changing the

direction of rotation.

Instructions for use

Always observe the safety instructions

and applicable regulations.

Screwdriving or nutsetting (fig. A)

• Select the appropriate bit for the screw (or nut) to

be driven.

• Select forward or reverse rotation as described

above.

• For nutsetting (DW263K) always use the correct

depth locator (5).

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of DeWalt DW274K T 2 in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Turkish, Spanish, Spanish, Norwegian as an attachment in your email.

The manual is 0,76 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

DeWalt DW274K T 2 Manual

Product: