790946
33
Zoom out
Zoom in
Previous page
1/92
Next page
ENGLISH
31
Turn the laser off when it is not in use.
Leaving the laser on increases the risk of staring
into the laser beam.
Do not operate the laser around children or
allow children to operate the laser. Serious
eye injury may result.
Do not remove or deface warning labels.
If labels are removed, user or others may
inadvertently expose themselves to radiation.
Position the laser securely on a level
surface. Damage to the laser or serious injury
could result if the laser falls.
Dress properly. Do not wear loose clothing
or jewellery. Contain long hair. Keep your
hair, clothing and gloves away from moving
parts. Loose clothing, jewellery or long hair can
be caught in moving parts. Air vents often cover
moving parts and should also be avoided.
WARNING: Use of controls or
adjustments or performance of
procedures other than those
specified herein may result in
hazardous radiation exposure.
WARNING! DO NOT DISASSEMBLE
THE ROTARY LASER. There are
no user serviceable parts inside.
Disassembling the rotary laser will
void all warranties on the product.
Do not modify the product in any
way. Modifying the tool may result in
hazardous laser radiation exposure.
Additional Safety Instructions
for Lasers
This laser complies with class 3R according
to DIN EN 60825-1:2007 (max 5 mW,
600–680 nm). Do not replace a laser diode
with a different type. If damaged, have the laser
repaired by an authorised repair agent.
Only qualified and trained persons are
allowed to install, adjust and operate the laser
equipment. Areas in which class 3R lasers are
used have to be posted with an appropriate
laser warning sign.
Do not use the laser for any purpose other than
projecting laser lines.
Before first use, check that the safety warnings
on the label have been formulated in your
language. Do not use the tool if it does not carry
the warnings in your language!
As the beam of a class 3R laser provides high
visibility over longer distances, the potential risk
of damage to the eye remains unchanged within
the radius of application.
Always set up the tool at a position where the
laser beam cannot cross any person at eye
level. Be extra alert for the presence of stairs
and specular surfaces.
Residual Risks
The following risks are inherent to the use of
these machines:
Injuries caused by staring into laser beam.
Markings on Tool
The following pictographs are shown on the tool:
Read instruction manual before use.
Laser warning.
Class 3R laser.
Protection class: IP54.
DATE CODE POSITION
Date Code, which also includes the year of
manufacture, is printed on the bottom of the laser
near the mounting threads.
Example: 2010 XX XX
Year of Manufacture
Important Safety Instructions for All
Battery Chargers
SAVE THESE INSTRUCTIONS: This manual
contains important safety and operating instruc tions
for battery chargers.
Before using charger, read all instructions and
cautionary markings on charger, battery pack,
and product using battery pack.
DANGER: Electrocution hazard.
230 volts are present at charging
terminals. Do not probe with conductive
objects. Electric shock or electrocution
may result.
WARNING: Shock hazard. Do not allow
any liquid to get inside charger. Electric
shock may result.
33


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for DeWalt DW078 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of DeWalt DW078 in the language / languages: English, German, Danish, French, Swedish, Norwegian, Finnish as an attachment in your email.

The manual is 4.61 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of DeWalt DW078

DeWalt DW078 User Manual - Dutch, Italian, Portuguese, Turkish, Spanish - 88 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info