Manual DeWalt DW055PL (page 4 of 20) (English, French, Portuguese, Spanish)

790850

Zoom out

Zoom in

1/20

FCC Statement

These devices comply with Part 15 of the FCC

Rules. Operation is subject to the following

two conditions: 1) this device may not cause

harmful interference, and 2) this device must

accept any interference received, including

interference that may cause undesired

operation.

NOTE: This equipment has been tested and

found to comply with the limits for a Class

B digital device, pursuant to Part 15 of the

FCC Rules. These limits are designed to

provide reasonable protection against harmful

interference in a residential installation.

This equipment generates, uses and can

radiate radio frequency energy and, if not

installed and used in accordance with the

instructions, may cause harmful interference

to radio communications. However, there is

no guarantee that interference will not occur

in a particular installation. If this equipment

does cause harmful interference to radio and

television reception, which can be determined

by turning the equipment off and on, the user

is encouraged to try to correct the interference

by one or more of the following measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the

equipment and receiver.

• Connect the equipment into an outlet

on a circuit different from that which the

receiver is connected.

• Consult the dealer or an experienced radio/

TV technician for help.

Canada, Industry Canada (IC) Notices

Class B digital circuitry of this device complies

with Canadian ICES-003. This device complies

with Industry Canada license-exempt RSS

standard(s). Operation is subject to the

following two conditions: 1) this device may

not cause interference, and 2) this device must

accept any interference, including interference

that may cause undesired operation of the

device.

Charging the Battery

Fully charge the battery before initial use and

whenever the tool has not been used for 6

months or longer.

WARNING:

Only charge product using

a certied power adapter that is

compliant with applicable country

regulations and international/regional

safety standards. Using adapters

that do not meet applicable safety

standards could result in injury.

1. Locate the port cover on the bottom of the

tool (Figure A 4).

2. Using your finger, gently pull the port cover

up (Figure C 1).

3. Insert the small end of the USB Recharge

Cable into the port on the bottom of the

tool, making sure to insert the flat side

of the cable into the flat side of the port

(Figure C 2).

4. Insert the USB end of the cable into a USB

port in a computer or USB power outlet

(Figure C 3).

5. Wait approximately 2.5 hours for the

battery to fully charge and then disconnect

the USB Recharge Cable.

When the tool is ON, the battery level appears

in the display window (Figure D 1).

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of DeWalt DW055PL in the language / languages: English, French, Portuguese, Spanish as an attachment in your email.

The manual is 2.5 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

DeWalt DW055PL Manual

Product: