Manual DeWalt DW030PL (page 3 of 24) (English, French, Portuguese, Spanish)

712352

Zoom out

Zoom in

1/24

Contents

• User Safety

• Battery Safety

• Setup

• Operation

• Warranty

• Error Codes

• Specications

Retain all sections of this manual for future reference.

User Safety

WARNING:

Carefully read the Safety Instructions and

Product Manual before using this product. The

person responsible for the product must ensure

that all users understand and adhere to these

instructions.

WARNING:

The following label information is placed on your

laser tool to inform you of the laser class for your

convenience and safety.

The DW030PL tool emits a visible laser beam, as shown

in Figure

#1. The laser beam emitted is Laser Class 2

per IEC 60825-1 and complies with 21 CFR 1040.10 and

1040.11 except for deviations pursuant to Laser Notice

No. 50, dated June 24, 2007.

WARNING:

While the laser tool is in operation, be careful not

to expose your eyes to the emitting laser beam

(red light source). Exposure to a laser beam

for an extended time period may be hazardous

to your eyes. Do not look into the beam with

optical aids.

WARNING: To reduce the risk of injury, the user

must read the product User Manual and the

Safety Manual.

FCC Compliance

This device complies with Part 15 of the FCC Rules.

Operation is subject to the following two conditions: (1)

This device may not cause harmful interference, and

(2) this device must accept any interference received,

including interference that may cause undesired operation.

FCC Statement

This equipment has been tested and found to comply with

the limits for a Class B digital device, pursuant to part 15

of the FCC rules. These limits are designed to provide

reasonable protection against harmful interference in a

residential installation. This equipment generates, uses,

and can radiate radio frequency energy and, if not installed

and used in accordance with the instructions, may cause

harmful interference to radio communications. However,

there is no guarantee that interference will not occur in a

particular installation. If this equipment does cause harmful

interference to radio or television reception, which can be

determined by turning the equipment off and on, the user

is encouraged to try to correct the interference by one or

more of the following measures:

- Reorient or relocate the receiving antenna.

- Increase the separation between the equipment and

the receiver.

- Connect the equipment into an outlet on a different circuit

(not the circuit to which the receiver is connected).

- Consult the dealer or an experienced radio/TV technician

for help.

Canada, Industry Canada (IC) Notices

Class B digital circuitry of this device complies with

Canadian ICES-003. This device complies with Industry

Canada license-exempt RSS standard(s). Operation is

subject to the following two conditions: (1) this device may

not cause interference, and (2) this device must accept

any interference, including interference that may cause

undesired operation of the device.

Under Industry Canada regulations, the radio transmitter(s)

in this device may only operate using an antenna of a type

and maximum (or lesser) gain approved for the transmitter

by Industry Canada. To reduce potential radio interference

to other users, the antenna type and its gain should be

so chosen that the equivalent isotropically radiated power

(e.i.r.p.) is not more than that necessary for successful

communication.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of DeWalt DW030PL in the language / languages: English, French, Portuguese, Spanish as an attachment in your email.

The manual is 1,28 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of DeWalt DW030PL

DeWalt DW030PL User Manual - English, German, Dutch, Danish, French, Italian, Portuguese, Swedish, Turkish, Spanish, Norwegian, Finnish - 68 pages

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

DeWalt DW030PL Manual

Product: