Manual DeWalt DW030PL (page 3 of 68) (English, German, Dutch, Danish, French, Italian, Portuguese, Swedish, Turkish, Spanish, Norwegian, Finnish)

712352

Zoom out

Zoom in

1/68

Contents

• User Safety

• Battery Safety

• Setup

• Operation

• Warranty

• Error Codes

• Specications

Retain all sections of this manual for future reference.

User Safety

WARNING:

Carefully read the Safety Instructions and

Product Manual before using this product. The

person responsible for the product must ensure

that all users understand and adhere to these

instructions.

WARNING:

The following label information is placed on your

laser tool to inform you of the laser class for your

convenience and safety.

The DW030PL-XJ tool emits a visible laser beam, as

shown in Figure A #1. The laser beam emitted is Laser

Class 2 per IEC 60825-1 and complies with 21 CFR

1040.10 and 1040.11 except for deviations pursuant to

Laser Notice No. 50, dated June 24, 2007.

WARNING:

While the laser tool is in operation, be careful not

to expose your eyes to the emitting laser beam

(red light source). Exposure to a laser beam

for an extended time period may be hazardous

to your eyes. Do not look into the beam with

optical aids.

WARNING: To reduce the risk of injury, the user

must read the product User Manual and the

Safety Manual.

Setup

Attaching the Wrist Strap

1. While facing the front of the tool, insert the thin end of

the wrist strap through one of the holes in the lower

right corner of the tool.

2. Push the thin end of the wrist strap until it goes

through the other hole.

3. Separate the two wires, which make up the thin end

of the wrist strap, to form a loop.

4. Insert the thick end of the wrist strap all the way

through the loop in the thin end, so the wrist strap is

securely fastened to the tool (Figure B).

Charging the Battery

1. Locate the port cover on the side of the tool (Figure

A #4).

2. Using your finger, gently pull the port cover down

(Figure E #1).

3. Insert the small end of the USB Recharge Cable into

the port on the side of the tool, making sure to insert

the flat side of the cable into the flat side of the port

(Figure E #2).

4. Insert the USB end of the cable into a USB port in

a computer or USB power outlet (Figure E #3).

5. Wait approximately 2.5 hours for the battery to fully

charge and then disconnect the USB Recharge

Cable.

When the tool is ON, the battery level appears in the

display window (Figure D #1).

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of DeWalt DW030PL in the language / languages: English, German, Dutch, Danish, French, Italian, Portuguese, Swedish, Turkish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 2.41 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of DeWalt DW030PL

DeWalt DW030PL User Manual - English, French, Portuguese, Spanish - 24 pages

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

DeWalt DW030PL Manual

Product: