Manual DeWalt dw 629 qs (page 32 of 128) (English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Turkish, Spanish, Norwegian, Finnish)

426998

Zoom out

Zoom in

1/128

ENGLISH

Fitting a Baseplate Extension

(Option) (ﬁ g. 1, 9)

When routing with large diameter cutters, it is

recommended to fit the baseplate extension

(DE6285) (w) for secure handling.

1. FIt the baseplate extension to the free end of

the guide rods (e).

2. Guide the tool with one hand on the knob and

the other on the opposite grip (i).

Fitting a Guide Bush (ﬁ g. 1, 10)

Together with a template, guide bushes play a

valuable part in cutting and shaping to a pattern.

The guide brush illustrated is available as an option.

1. Fit the guide bush (r) to the router base (q) as

shown.

Adjusting Templates to Guide

Brushes (ﬁ g. 11, 12)

Templates must be manufactured in accordance

with the diameter of the guide brush.

1. When using positive templates as in figure 11,

the template must be made smaller by half the

difference between the diameters of the guide

brush and the cutter.

2. When using negative templates as in figure 12,

the template must be made larger by half the

difference between the diameters of the guide

brush and the cutter.

Prior to Operation

1. Check that the cutter is correctly installed in the

collet.

2. Set the cutting depth.

3. Connect a dust extractor.

4. Make sure the plunge limiter is always locked

before switching on.

OPERATION

Instructions for Use

WARNING: Always observe the safety

instructions and applicable regulations.

WARNING: To reduce the risk

of serious personal injury, turn

tool off and disconnect tool from

power source before making any

adjustments or removing/installing

attachments or accessories.

WARNING: Always move your router

as indicated in fig. 13 (outer edges/inner

edges).

Proper Hand Position (ﬁ g. 15)

WARNING: To reduce the risk of

serious personal injury, ALWAYS use

proper hand position as shown.

WARNING: To reduce the risk of

serious personal injury, ALWAYS hold

securely in anticipation of a sudden

reaction.

Proper hand position requires each hand on the

handles (i).

Feed direction (ﬁ g. 13)

1. Always feed the workpiece against the rotating

cutter as shown in figure 13.

Switching On and Off (ﬁ g. 1)

1. On: pull the switch (a) up.

2. Off: press the switch (a) down.

WARNING: Loosen the plunge limiter

and allow the router carriage to regain

its rest position before switching off.

Using Guide Bushes (ﬁ g. 10)

1. Secure the template to the workpiece using end

clamps.

2. Select and install an appropriate guide bush.

3. Subtract the diameter of the cutter from the

outside diameter of the guide bush and divide by

2. This is the difference between the template

and the workpiece.

WARNING: If the workpiece is not thick

enough, place it on a piece of waste

wood.

WARNING: Make shallow cuts only!

Use cutters with a max. diameter of 40

mm.

Routing with Pilot Cutters

Where a parallel guide or guide bush are

inappropriate, it is possible to use pilot cutters for

cutting shaped edges.

Consult your dealer for further information on the

appropriate accessories.

These include collets (6–12.7mm) , a height

adjusting tool and router table for use in an inverted

position, finger jointing tools for dovetail and finger

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of DeWalt dw 629 qs in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Turkish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 2,71 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

DeWalt dw 629 qs Manual

Product: