Manual DeWalt dw 625 kqsu (page 25 of 100) (English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Turkish, Spanish, Spanish, Norwegian)

426997

Zoom out

Zoom in

1/100

ENGLISH

en - 6

Connecting a dust extractor (fig. A & K)

The dust extraction adapter (33) consists of a main

section (34), a clamping piece (35), a cutter plate (36),

two screws (37) and two nuts (38).

• Slide the clamping plate (35) onto the main

section (34) from the front.

• Fit the screws (37) and nuts (38).

• Insert the cutter plate (36) from the bottom and

rotate it until it clicks in place.

• Mount the unit to the router base.

• Connect a dust extractor hose to the dust

extraction adaptor (33).

• Loosen the screw in the top of the router and fit

the hose guide as shown.

Instructions for use

• Always observe the safety instructions

and applicable regulations.

• Always move your Router as indicated in

fig. L (outer edges/inner edges).

Prior to operation:

• Check that the cutter is correctly installed in the

collet.

• Select the optimal speed using the electronic

speed control dial.

• Set the cutting depth.

• Connect a dust extractor.

• Make sure the plunge limiter is always locked

before switching ON.

Switching ON and OFF (fig. A & G)

• ON: pull the switch (1) UP.

• OFF: press the switch (1) DOWN.

Loosen the plunge limiter and allow the

router carriage to regain its rest position

before switching OFF.

Using the guide bushes (fig. J)

• Secure the template to the workpiece using end

clamps.

• Select and install an appropriate guide bush (31).

• Subtract the diameter of the cutter from the outside

diameter of the guide bush and divide by 2. This is

the difference between template and workpiece.

If the workpiece is not thick enough,

place it on a piece of waste wood.

Guiding off a batten

Where an edge guide cannot be used, it is also

possible to guide the router along a batten clamped

across the workpiece (with an overhang at both ends).

Freehand routing

Your Router can also be used without any sort of

guide, e.g. for signwriting or creative work.

Make shallow cuts only!

Use cutters with a max. diameter of 6 mm.

Routing with pilot cutters (fig. B)

Where a parallel guide or guide bush are

inappropriate, it is possible to use pilot cutters (24)

for cutting shaped edges.

Consult your dealer for further information on the

appropriate accessories.

These include collets (1/4-1/2"), a depth stop and

router table for use in inverted position, finger

jointing tools for dovetail and finger jointing jigs,

dowel jointing templates, guide bushes (17-40 mm),

guide bushes, guide bush holders and guide rails in

various lengths.

Maintenance

Your DEWALT Power Tool has been designed to

operate over a long period of time with a minimum

of maintenance. Continuous satisfactory operation

depends upon proper tool care and regular cleaning.

Lubrication

Your Power Tool requires no additional lubrication.

Cleaning

Keep the ventilation slots clear and regularly clean

the housing with a soft cloth.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of DeWalt dw 625 kqsu in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Turkish, Spanish, Spanish, Norwegian as an attachment in your email.

The manual is 0,88 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

DeWalt dw 625 kqsu Manual

Product: