Manual DeWalt DW 310 (page 21 of 100) (English, German, Dutch, Danish, French, Italian, Portuguese, Swedish, Turkish, Spanish, Norwegian, Finnish)

110183

Zoom out

Zoom in

1/100

ENGLISH

d Store idle power tools out of the reach of

children and do not allow persons unfamiliar

with the power tool or these instructions to

operate the power tool. Power tools are

dangerous in the hands of untrained users.

e Maintain power tools. Check for misalignment

or binding of moving parts, breakage of parts

and any other condition that may affect the

power tools operation. If damaged, have the

power tool repaired before use. Many accidents

are caused by poorly maintained power tools.

f Keep cutting tools sharp and clean. Properly

maintained cutting tools with sharp cutting edges

are less likely to bind and are easier to control.

g Use the power tool, accessories and tool bits

etc., in accordance with these instructions

and in the manner intended for the particular

type of power tool, taking into account the

working conditions and the work to be

performed. Use of the power tool for operations

different from those intended could result in a

hazardous situation.

5 Service

a Have your power tool serviced by a qualified

repair person using only identical replacement

parts. This will ensure that the safety of the

power tool is maintained.

Additional safety rules for cutsaws

Switching on and off

• After switching off, never attempt to stop the saw

blade with your fingers.

• Never put the saw down on a table or work bench

unless switched off. The saw blade will keep

running briefly after the tool has been switched off.

When sawing

• When using saw blades specially designed for

cutting wood remove all nails and metal objects

from the workpiece before starting work.

• Wherever possible, use clamps and vices to

fasten the workpiece securely.

• Do not attempt to saw extremely small workpieces.

• Do not bend too far forward. Make sure that you

always stand firmly, particularly on scaffolding

and ladders.

• Always hold the saw with both hands.

• For cutting curves and pockets, use an adapted

saw blade.

Checking and changing the saw blade

• Only use saw blades conforming to the

specifications contained in these operating

instructions.

• Only sharp saw blades in perfect working

condition should be used; cracked or bent saw

blades should be discarded and replaced at once.

• Ensure that the saw blade is securely fixed.

Package contents

The package contains:

1 Reciprocating saw

1 General purpose saw blade set

1 Kitbox (K-models only)

1 Instruction manual

1 Exploded drawing

• Check for damage to the tool, parts or accessories

which may have occurred during transport.

• Take the time to thoroughly read and understand

this manual prior to operation.

Description (fig. A)

Your DW310/DW311K reciprocating saw has been

designed for professional sawing of wood, metal

and tubes. The compact design permits cutting

extremely close to the edge of difficult areas.

1 Variable speed switch

2 Speed control dial (DW311K)

3 Pendulum stroke selector (DW311K)

4 Blade holder

5 Saw shoe

6 Shoe release lever

7 Blade clamp collar

Electrical safety

The electric motor has been designed for one

voltage only. Always check that the power supply

corresponds to the voltage on the rating plate.

Your DEWALT tool is double insulated in

accordance with EN 60745; therefore no

earth wire is required.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of DeWalt DW 310 in the language / languages: English, German, Dutch, Danish, French, Italian, Portuguese, Swedish, Turkish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 0,92 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

DeWalt DW 310 Manual

Product: