110192
17
Zoom out
Zoom in
Previous page
1/72
Next page
17
ENGLISH
Package contents
The package contains:
1 Reciprocating saw
1 General purpose saw blade set
1 Kitbox (K-models only)
1 Instruction manual
1 Exploded drawing
Check for damage to the tool, parts or accessories which may have
occurred during transport.
Take the time to thoroughly read and understand this manual prior to
operation.
Description ( g. A)
Your DW304 reciprocating saw has been designed for professional
sawing of wood, metal and tubes. The compact design permits cutting
extremely close to the edge of dif cult areas.
1 Variable speed switch
2 Blade clamp lever
3 Saw shoe
Electrical safety
The electric motor has been designed for one voltage only. Always
check that the power supply corresponds to the voltage on the rating
plate.
#
Your D E WALT tool is double insulated in accordance with
EN 60745; therefore no earth wire is required.
@
115 V units have to be operated via a failsafe isolating
transformer with an earth screen between the primary and
secondary winding.
Mains plug replacement
(U.K. & Ireland only)
Should your mains plug need replacing and you are competent to do
this, proceed as instructed below. If you are in doubt, contact an
authorized D E WALT repair agent or a quali ed electrician.
Disconnect the plug from the supply.
Cut off the plug and dispose of it safely; a plug with bared copper
conductors is dangerous if engaged in a live socket outlet.
Only t 13 Amperes BS1363A approved plugs tted with the correctly
rated fuse (1).
The cable wire colours, or a letter, will be marked at the connection
points of most good quality plugs. Attach the wires to their respective
points in the plug (see below). Brown is for Live (L) (2) and Blue is for
Neutral (N) (4).
Before replacing the top cover of the mains plug ensure that the
cable restraint (3) is holding the outer sheath of the cable rmly and
that the two leads are correctly xed at the terminal screws.
!
Never use a light socket.
Never connect the live (L) or neutral (N) wires to the earth
pin marked E or .
For 115 V units with a power rating exceeding 1500 W, we recommend
to t a plug to BS4343 standard.
Using an extension cable
If an extension cable is required, use an approved extension cable
suitable for the power input of this machine (see technical data). The
minimum conductor size is 1.5 mm
2
. The cable has to have a rubber
jacket and a grounding conductor.
When using a cable reel, always unwind the cable completely.
Also refer to the table below.
CONDUCTOR SIZE (MM
2
) CABLE RATING (AMPERES)
0.75 6
1.00 10
1.50 15
2.50 20
4.00 25
CABLE LENGTH (M)
7.5 15 25 30 45 60
VOLTAGE AMPERES CABLE RATING (AMPERES)
230 0 - 2.0 6 6 6 6 6 6
2.1 - 3.4 6 6 6 6 6 6
3.5 - 5.0 6 6 6 6 10 15
5.1 - 7.0 10 10 10 10 15 15
7.1 - 12.0 15 15 15 15 20 20
12.1 - 20.0 20 20 20 20 25 -
Assembly and adjustment
@
Prior to assembly and adjustment always unplug the tool.
Mounting the saw blade ( g. B)
Move the blade clamp lever (2) up to release the blade clamping
mechanism.
Insert the saw blade into the holder (4) until it engages. The blade
can be installed with the teeth pointing down or up, or left or right.
Move the blade clamp lever (2) down to lock the blade clamping
mechanism.
To remove the saw blade, proceed in reverse order.
Saw blades
material recommended saw blade
ferrous metal ne-toothed
non ferrous metal coarse-toothed
wood coarse-toothed
plastic ne-toothed
masonry carbide-tipped
A wide variety of dedicated saw blades is available as an option.
@
Always select your saw blade with great care.
Instructions for use
@
Always observe the safety instructions and applicable
regulations.
Ensure the material to be sawn is secured in place.
Apply only a gentle pressure to the tool and do not exert side
pressure on the saw blade. If possible, work with the saw
shoe pressed against the workpiece. This prevents damage
to the blade and stops the tool from jerking and vibrating.
When sawing in walls or oors be aware of the location of
pipework and wiring. Always hold the tool by its handle.
17


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for DeWalt DW 304 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of DeWalt DW 304 in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Turkish, Spanish, Spanish, Norwegian as an attachment in your email.

The manual is 0,99 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info