Manual DeWalt dw 173 (page 19 of 76) (English, German, Dutch, Danish, French, Italian, Portuguese, Swedish, Turkish, Spanish, Norwegian, Finnish)

387214

Zoom out

Zoom in

1/76

ENGLISH

15 en - 4

Using an extension cable

If an extension cable is required, use an approved

extension cable suitable for the power input of this

tool (see technical data). The minimum conductor

size is 1.5 mm

. When using a cable reel, always

unwind the cable completely.

Also refer to the table below.

Conductor size (mm

) Cable rating (Amperes)

0.75 6

1.00 10

1.50 15

2.50 20

4.00 25

Cable length (m)

7.5 15 25 30 45 60

Voltage Amperes Cable rating (Amperes)

115 0 - 2.0 6 6 6 6 6 10

2.1 - 3.4 6 6 6 6 15 15

3.5 - 5.0 6 6 10 15 20 20

5.1 - 7.0 10 10 15 20 20 25

7.1 - 12.0 15 15 20 25 25 -

12.1 - 20.0 20 20 25 - - -

230 0 - 2.0 6 6 6 6 6 6

2.1 - 3.4 6 6 6 6 6 6

3.5 - 5.0 6 6 6 6 10 15

5.1 - 7.0 10 10 10 10 15 15

7.1 - 12.0 15 15 15 15 20 20

12.1 - 20.0 20 20 20 20 25 -

Assembly and adjustment

Prior to assembly and adjustment always

unplug the tool.

DW203 - Selecting the operating mode (fig. B)

The percussion drill can be used in two operating

modes:

Rotary drilling:

for steel, wood and plastics.

Percussion drilling:

simultaneous rotating and impacting for

concrete and masonry drilling

operations.

• Select the required operating mode by rotating

the symbol on the mode selector (4) to the

required position.

Forward/reverse slider (fig. C)

• To select forward or reverse rotation, use the

forward/reverse-switch (3).

Always wait until the motor has come to

a complete standstill before changing the

direction of rotation.

Replacing accessories

Inserting and removing a drill bit (fig. A)

Keyed chuck

• Open the chuck by turning the sleeve (6)

counterclockwise and insert the bit shank.

• Put the chuck key (7) into each hole in the side of

the chuck and turn clockwise until tight.

• To remove the bit, proceed in reverse order.

Keyless chuck (option)

• Open the chuck by turning the sleeve (6)

counterclockwise and insert the bit shank.

• Tighten firmly by turning the sleeve clockwise.

• To remove the bit, proceed in reverse order.

Placing and removing a screwdriver bit (fig. D)

• Hexagonal

/4" screwdriver bits and adapters can

be inserted directly into the chuck shaft.

• Remove the chuck as indicated under “Chuck

removal” and apply a strong pressure on the bit

to be inserted.

• To remove the screwdriver bit, hold the unit in

one hand and pull out the bit using nose pliers.

Chuck removal (fig. E & F)

Keyed chuck

• Open the chuck jaws as far as possible.

• Insert a screwdriver into the chuck and remove

the chuck retaining screw (8) by turning

clockwise as shown.

• Insert the chuck key (7) into one of the holes in

the side of the chuck and strike it with a hammer

as shown.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of DeWalt dw 173 in the language / languages: English, German, Dutch, Danish, French, Italian, Portuguese, Swedish, Turkish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 0,75 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

DeWalt dw 173 Manual

Product: