386254
18
Zoom out
Zoom in
Previous page
1/64
Next page
en - 4
Conductor size (mm
2
) Cable rating (Amperes)
0.75 6
1.00 10
1.50 15
2.50 20
4.00 25
Cable length (m)
7.5 15 25 30 45 60
Voltage Amperes Cable rating (Amperes)
115 0-2.0 66 66 610
2.1 - 3.4 6 6 6 6 15 15
3.5 - 5.0 6 6 10 15 20 20
5.1 - 7.0 10 10 15 20 20 25
7.1 - 12.0 15 15 20 25 25 -
12.1 - 20.0 20 20 25 - - -
220/240 0 - 2.0 6 6 6 6 6 6
2.1 - 3.4 6 6 6 6 6 6
3.5 - 5.0 6 6 6 6 10 15
5.1 - 7.0 10 10 10 10 15 15
7.1 - 12.0 15 15 15 15 20 20
12.1 - 20.0 20 20 20 20 25 -
Assembly and adjustment
Prior to assembly and adjustment always
unplug the tool.
Inserting and removing a bit (fig. A)
Align the pilot hole (6) in the chuck (1) with an
opening in the chuck guard (7).
Insert the chuck key into the pilot hole (6).
Open the chuck jaws (8) by turning
counterclockwise.
Insert the shank of a bit into the chuck.
Tighten the chuck using all three holes.
To remove the bit, proceed in reverse order.
Chuck key holder (fig. D)
Your DeWALT Heavy Duty Right Angle Drill is
supplied with a chuck key holder.
Fit the chuck key (5) to the chuck key holder (4)
as shown.
Instructions for use
Always observe the safety instructions
and applicable regulations.
ENGLISH
Prior to operation:
Insert the appropriate bit.
Mark the spot where the hole is to be drilled.
Switching ON and OFF (fig. A)
To run the tool, press the paddle switch (2).
To stop the tool, release the paddle switch.
Tool handling (fig. B)
Thanks to the paddle switch the drill can be used in
various positions as illustrated for optimum control
and comfort.
Consult your dealer for further information on the
appropriate accessories.
Maintenance
Your DeWALT Power Tool has been designed to
operate over a long period of time with a minimum
of maintenance. Continuous satisfactory operation
depends upon proper tool care and regular cleaning.
Chuck removal (fig. C)
Insert the straight end of the chuck key handle
into the chuck (1).
Strike the key (5) sharply in a counterclockwise
direction using a wooden mallet or similar object
to loosen the chuck.
Unscrew the chuck by hand.
Lubrication
Your Power Tool requires no additional lubrication.
Cleaning
Keep the ventilation slots clear and regularly clean
the housing with a soft cloth.
Unwanted tools and the environment
Take your tool to an authorized DeWALT repair
agent where it will be disposed of in an
environmentally safe way.
18


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for DeWalt dw 160-qs at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of DeWalt dw 160-qs in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Turkish, Spanish, Spanish, Norwegian as an attachment in your email.

The manual is 0,31 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info