Manual DeWalt DCT410 T 1 (page 48 of 204) (English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Turkish, Spanish, Norwegian, Finnish)

548898

Zoom out

Zoom in

1/204

ENGLISH

The charger and battery pack are not serviceable.

There are no serviceable parts inside.

Cleaning

WARNING: Blow dirt and dust off with

clean, dry air at least once a week. To

minimize the risk of eye injury, always

wear proper eye protection when

performing this.

WARNING: Never use solvents or

other harsh chemicals for cleaning the

non-metallic parts of the tool. These

chemicals may weaken the materials

used in these parts. Use a cloth

dampened only with water and mild

soap. Never let any liquid get inside the

tool; never immerse any part of the tool

into a liquid.

CHARGER CLEANING INSTRUCTIONS

WARNING: Shock hazard. Disconnect

the charger from the AC outlet before

cleaning. Dirt and grease may be

removed from the exterior of the charger

using a cloth or soft non-metallic brush.

Do not use water or any cleaning

solutions.

Optional Accessories

WARNING: Since accessories, other

than those offered by DEWALT, have

not been tested with this product, use

of such accessories with this tool could

be hazardous. To reduce the risk of

injury, only DEWALT recommended

accessories should be used with this

product.

RECOMMENDED ACCESSORIES

• DCT4101 – 17mm diameter camera cable

• DCT4102 – 9mm diameter camera cable

• DCT4105 – 5.8mm diameter camera cable

• DCT4103 – 17mm diameter, 0.9m long cable

extension

• Hook and magnet DCT410 (available only as

spare parts)

• Hook, magnet and mirror DCT411 (available

only as spare parts)

Consult your dealer for further information on the

appropriate accessories.

Troubleshooting

• Make sure the 10.8 V battery is charged.

• Make sure the screen is fully charged.

• Make sure the screen is always attached to

the handle set. The picture may freeze if you

attempt to remove the screen from the handle

set while taking a photo or video.

• Make sure the battery is installed on the handle

set when in use.

• Make sure the camera cable is attached to the

handle set properly.

• Make sure the handle set is turned on as well

as the screen.

• Make sure the back of the handle set is not

covered with debris so the screen slides on

easily and no damage to the screen occurs.

• If the screen freezes or won’t turn on, insert a

small object (i.e., paper clip end) into the reset

button (s) located on the back of the screen.

• If the picture is dim, roll the brightness control

switch to brighten the LED light.

Protecting the Environment

Separate collection. This product must

not be disposed of with normal

household waste.

Should you ﬁnd one day that your DEWALT product

needs replacement, or if it is of no further use to you,

do not dispose of it with household waste. Make this

product available for separate collection.

Separate collection of used products

and packaging allows materials to be

recycled and used again. Re-use of

recycled materials helps prevent

environmental pollution and reduces

the demand for raw materials.

Local regulations may provide for separate collection

of electrical products from the household, at

municipal waste sites or by the retailer when you

purchase a new product.

DEWALT provides a facility for the collection and

recycling of DEWALT products once they have

reached the end of their working life. To take

advantage of this service please return your product

to any authorised repair agent who will collect them

on our behalf.

You can check the location of your nearest

authorised repair agent by contacting your local

DEWALT office at the address indicated in this

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of DeWalt DCT410 T 1 in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Turkish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 38,38 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of DeWalt DCT410 T 1

DeWalt DCT410 T 1 Additional guide - Polish - 24 pages

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

DeWalt DCT410 T 1 Manual

Product: