Manual DeWalt DCT410 T 1 (page 43 of 204) (English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Turkish, Spanish, Norwegian, Finnish)

548898

Zoom out

Zoom in

1/204

ENGLISH

Camera Cable (ﬁ g. 5)

Align the camera cable (c) with the camera

connector (d). Push in and turn the connector

counterclockwise (camera screen facing you) to

firmly attach.

To remove the camera cable, turn the connector

clockwise (direction of arrow).

Additional camera cable and extensions are available

at additional cost. Consult your dealer for further

information.

Hook and Magnet (ﬁ g. 6)

DCT410

The hook is beneficial for retrieving cable or wire

located in tight spaces. The magnet is beneficial for

retrieving metal objects in tight spaces.

To attach the hook or magnet, turn the knurled part

of the camera counterclockwise until it stops.

Align the hook or magnet with the gray groove (t)

then slide it down until the tabs (u) at the top of the

hook/magnet are securely in the notches (v) located

in the camera lens.

Turn the knurled part clockwise to lock the base of

the hook and magnet.

Hook, Magnet and Mirror (ﬁ g.7,8)

DCT411

Follow the process below to assemble the hook,

magnet or mirror onto the DCT411 9mm camera.

1. With the sleeve (w) on the accessory, insert the

bottom of accessory (bent wire) into the hole (x)

in the 9mm camera cable.

2. Make sure the accessory is in the groove (y) on

the sleeve and slide the sleeve onto the camera

until the sleeve covers the hole(x).

CAUTION: Cut Hazard. Use care when

handling hook.

Belt Hook (ﬁ g. 9)

(Optional Accessory)

WARNING: To reduce the risk of

serious personal injury, DO NOT

suspend camera overhead or suspend

objects from the belt hook. ONLY hang

camera’s belt hook from a work belt.

WARNING: To reduce the risk of

serious personal injury, ensure the

screw (z) holding the belt hook is

secure.

IMPORTANT: When attaching or removing the belt

hook, use only the screw (z) that is provided.

The belt hook (aa) can be attached to either side

of the tool using only the screw (z) provided, to

accommodate left- or right-handed users. If the

hook is not desired at all, it can be removed from

the tool.

To move belt hook, remove the screw (z) that holds

the belt hook in place then reassemble on the

opposite side.

OPERATION

Instructions for Use

WARNING: Always observe the safety

instructions and applicable regulations.

Inserting and Removing the

Battery Pack from the Inspection

Camera (ﬁ g. 10)

NOTE: Make sure your battery pack (a) is fully

charged.

TO INSTALL THE BATTERY PACK INTO THE TOOL HANDLE

1. Align the battery pack with the rails inside the

handle.

2. Slide it firmly into place until you hear the lock

snap into place.

TO REMOVE THE BATTERY PACK FROM THE TOOL

1. Press the release button (bb) and firmly pull the

battery pack out of the camera handle.

2. Insert battery pack into the charger as

described in the charger section of this manual.

Getting Started

INITIAL SETUP

Language Setup

1. Press the forward or back arrow to select

English, German, Spanish, French, Italian or

Dutch.

2. Press the OK button to confirm and exit.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of DeWalt DCT410 T 1 in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Turkish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 38,38 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of DeWalt DCT410 T 1

DeWalt DCT410 T 1 Additional guide - Polish - 24 pages

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

DeWalt DCT410 T 1 Manual

Product: