548898

DeWalt DCT410 T 1 Manual

38
Zoom out
Zoom in
Previous page
1/204
Next page
ENGLISH
36
• Do not use the inspection camera around
corrosive chemicals. Exposure to corrosive,
oily environments can ruin the plastic covering
on the camera head and ruin the picture quality.
• Do not use the camera if condensation
forms inside the lens. Let the water evaporate
before using again.
• Do not remove or deface warning labels.
• To avoid damaging the inspection camera or
the equipment under test, protect them from
the following:
– EMF (electromagnetic fields) like from arc
welders, induction heaters, etc.
– ESD (electrostatic discharge).
– Thermal shock (caused by abrupt ambient
temperature changes for highest accuracy;
allow 30 minutes for thermometer to stabilize
before use).
WARNING: Do not expose camera,
monitor or battery to excessive heat
such as sunshine, fire or the like.
WARNING: Shock hazard. Do not
allow the inspection camera cable
to come into contact with live wires.
Shut off circuit breakers to the entire
area to avoid injury.
WARNING: Do not use on humans
or animals. This is not for human or
animal use and can cause injury if used.
WARNING: ALWAYS use safety
glasses. Everyday eyeglasses are
NOT safety glasses. Also use face or
dust mask if cutting operation is dusty.
ALWAYS WEAR CERTIFIED SAFETY
EQUIPMENT.
CAUTION: When not in use, place
inspection camera on its side on
a stable surface where it will not
cause a tripping or falling hazard.
Some tools with large battery packs will
stand upright on the battery pack but
may be easily knocked over.
WARNING: Modifications not
authorised by the manufacturer may
void user’s authority to operate this
device.
Residual Risks
In spite of the application of the relevant safety
regulations and the implementation of safety
devices, certain residual risks cannot be avoided.
These are:
– Risk of personal injury due to prolonged use.
– Risk of personal injury due to unintentional
contact with current-carrying parts during the
work process.
Markings on Inspection Camera
The following pictograms are shown on the
inspection camera:
Read instruction manual before use.
DATE CODE POSITION
The date code, which also includes the year of
manufacture, is printed into the housing surface that
forms the mounting joint between tool and battery.
Example:
2011 XX XX
Year of Manufacture
Important Safety Instructions for All
Battery Chargers
SAVE THESE INSTRUCTIONS: This manual
contains important safety and operating instruc tions
for the DCB100 and DCB105 battery chargers.
• Before using charger, read all instructions and
cautionary markings on charger, battery pack,
and product using battery pack.
WARNING: Shock hazard. Do not allow
any liquid to get inside charger. Electric
shock may result.
CAUTION: Burn hazard. To reduce
the risk of injury, charge only DEWALT
rechargeable batteries. Other types of
batteries may burst causing personal
injury and damage.
CAUTION: Children should be
supervised to ensure that they do not
play with the appliance.
NOTICE: Under certain conditions, with
the charger plugged in to the power
supply, the charger can be shorted by
foreign material. Foreign materials of
a conductive nature such as, but not
limited to, grinding dust, metal chips,
steel wool, aluminum foil, or any buildup
of metallic particles should be kept away
from charger cavities. Always unplug the
charger from the power supply when
there is no battery pack in the cavity.
Unplug charger before attempting to
clean.
… 38 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for DeWalt DCT410 T 1 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of DeWalt DCT410 T 1 in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Turkish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 38,38 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of DeWalt DCT410 T 1

DeWalt DCT410 T 1 Additional guide - Polish - 24 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info