Manual DeWalt DCS310 T 2 (page 37 of 188) (English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Turkish, Spanish, Norwegian, Finnish)

546574

Zoom out

Zoom in

1/188

ENGLISH

small metal objects that can make a

connection from one terminal to another.

Shorting the battery terminals together may

cause burns or a fire.

d) Under abusive conditions, liquid may be

ejected from the battery, avoid contact.

If contact accidentally occurs, flush with

water. If liquid contacts eyes, additionally

seek medical help. Liquid ejected from the

battery may cause irritation or burns.

6) SERVICE

a) Have your power tool serviced by a

qualified repair person using only identical

replacement parts. This will ensure that the

safety of the power tool is maintained.

Additional Safety Instructions for

Reciprocating Saws

• Hold power tool by insulated gripping

surfaces when performing an operation

where the cutting accessory may contact

hidden wiring. Cutting accessory contacting a

“live” wire will make exposed metal parts of the

power tool “live” and could give the operator an

electric shock.

• ALWAYS wear a dust mask. Exposure to

dust particles can cause breathing difficulty and

possible injury.

• NEVER switch on the tool when the saw blade

is jammed in the workpiece or in contact with

the material.

• Keep hands away from moving parts. Never

place your hands near the cutting area.

• Use extra caution when cutting overhead

and pay particular attention to overhead

wires which may be hidden from view.

Anticipate the path of falling branches and

debris ahead of time.

• Do not operate this tool for long periods of

time. Vibration caused by the operating action

of this tool may cause permanent injury to

fingers, hands, and arms. Use gloves to provide

extra cushion, take frequent rest periods, and

limit daily time of use.

SWITCHING ON AND OFF

• After switching off, never attempt to stop the

saw blade with your fingers.

• Never put the saw down on a table or work

bench unless switched off. The saw blade will

keep running briefly after the tool has been

switched off.

WHEN SAWING

• When using saw blades specially designed for

cutting wood, remove all nails and metal objects

from the workpiece before starting work.

• Wherever possible, use clamps and vices to

fasten the workpiece securely.

• Do not attempt to saw extremely small

workpieces.

• Do not bend too far forward. Make sure

that you always stand firmly, particularly on

scaffolding and ladders.

• Always hold the saw with both hands.

• For cutting curves and pockets, use an adapted

saw blade.

CHECKING AND CHANGING THE SAW BLADE

• Only use saw blades conforming to the

specifications contained in these operating

instructions.

• Only sharp saw blades in perfect working

condition should be used; cracked or bent saw

blades should be discarded and replaced at

once.

• Ensure that the saw blade is securely fixed.

Residual Risks

In spite of the application of the relevant safety

regulations and the implementation of safety

devices, certain residual risks cannot be avoided.

These are:

– Impairment of hearing.

– Risk of personal injury due to flying particles.

– Risk of burns due to accessories becoming hot

during operation.

– Risk of personal injury due to prolonged use.

Markings on Tool

The following pictograms are shown on the tool:

Read instruction manual before use.

Wear ear protection.

Wear eye protection.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of DeWalt DCS310 T 2 in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Turkish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 20,03 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

DeWalt DCS310 T 2 Manual

Product: