712257

DeWalt DCH253 Manual

13
Zoom out
Zoom in
Previous page
1/60
Next page
11
English
Mode Selector (Fig. 4)
CAUTION: Do not change to drill or hammerdrill mode with a chisel
bit in the chuck. Personal injury and damage to tool mayresult.
CAUTION: Never change the mode while the unit isrunning.
For straight drilling, rotate the mode
selector (D) until the arrow points to the drill
bit symbol (J). For rotary hammer mode,
align the arrow with the rotary hammer
symbol (K). For chipping mode, align arrow
with the chipping symbol (L).
NOTE: The mode selector (D) must be
in drill, hammer or chipping mode at all
times. There are no operable positions
inbetween.
Forward/Reverse Control Button (Fig. 2, 5)
A forward/reverse control button (C) determines the direction of bit
rotation and also serves as a lock-offbutton.
To select forward rotation, release the trigger switch (B) and depress
the forward/reverse control button on the right side of thetool.
To select reverse, depress the forward/reverse control button on the
left side of thetool.
The center position of the control button locks the tool in the
off position. When changing the position of the control button, be
sure the trigger isreleased.
NOTE: The first time the tool is run after changing the direction of
rotation, you may hear a click on start up. This is normal and does not
indicate aproblem.
FIG. 4
D
J
K
L
1. Position the utility hook into the extended position and remove the
hex headscrew.
2. Pull out the utility hook (J) until it is free fromunit.
3. Reinsert the utility hook into the desired side and push it into theslot.
NOTE: On some models the slot may be covered with a sticker.
Either remove the sticker or pierce the sticker to expose the
slotunderneath.
4. Re-insert the hex screw and tightensecurely.
If use of the hook is not desired at all, it can be removedcompletely.
J
FIG. 3
… 13 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for DeWalt DCH253 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of DeWalt DCH253 in the language / languages: English, French, Spanish as an attachment in your email.

The manual is 4,61 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info