Manual DeWalt DCF813 T 3 (page 40 of 172) (English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Turkish, Spanish, Norwegian, Finnish)

549695

Zoom out

Zoom in

1/172

ENGLISH

Usage

Your impact tool generates the following output

torque:

Cat # Ft.-Lbs. In.-Lbs. Nm

DCF813 96 1150 130

DCF815 79 950 107

CAUTION: Ensure fastener and/or

system will withstand the level of torque

generated by the tool. Excessive torque

may cause breakage and possible

personal injury.

1. Place the socket on the fastener head. Keep

the tool pointed straight at the fastener.

2. Press switch to start operation. Always check

torque with a torque wrench, as the fastening

torque is affected by many factors including the

following:

• Voltage: Low voltage, due to a nearly

discharged battery, will reduce fastening

torque.

• Socket size: Failure to use the correct

socket size will cause a reduction in fastening

torque.

• Bolt Size: Larger bolt diameters generally

require higher fastening torque. Fastening

torque will also vary according to length,

grade, and torque coefficient.

• Bolt: Ensure that all threads are free of rust

and other debris to allow proper fastening

torque.

• Material: The type of material and surface

finish of the material will affect fastening

torque.

• Fastening Time: Longer fasten ing time

results in increased fastening torque. Using

a longer fastening time than recom mended

could cause the fasteners to be overstressed,

stripped or damaged.

MAINTENANCE

Your DEWALT power tool has been designed to

operate over a long period of time with a minimum

of maintenance. Continuous satisfactory operation

depends upon proper tool care and regular cleaning.

WARNING: To reduce the risk

of serious personal injury, place

the forward/reverse button in

the lock-off position or turn tool

off and disconnect battery pack

before making any adjustments or

removing/installing attachments or

accessories.

The charger and battery pack are not serviceable.

There are no serviceable parts inside.

Lubrication

Your power tool requires no additional lubrication.

Cleaning

WARNING: Blow dirt and dust out of

the main housing with dry air as often as

dirt is seen collecting in and around the

air vents. Wear approved eye protection

and approved dust mask when

performing this procedure.

WARNING: Never use solvents or

other harsh chemicals for cleaning the

non-metallic parts of the tool. These

chemicals may weaken the materials

used in these parts. Use a cloth

dampened only with water and mild

soap. Never let any liquid get inside the

tool; never immerse any part of the tool

into a liquid.

CHARGER CLEANING INSTRUCTIONS

WARNING: Shock hazard. Disconnect

the charger from the AC outlet before

cleaning. Dirt and grease may be

removed from the exterior of the charger

using a cloth or soft non-metallic brush.

Do not use water or any cleaning

solutions.

Optional Accessories

WARNING: Since accessories, other

than those offered by DEWALT, have

not been tested with this product, use

of such accessories with this tool could

be hazardous. To reduce the risk of

injury, only DEWALT, recommended

accessories should be used with this

product.

WARNING: Use only impact

accessories. Non-impact accessories

may break and cause a hazardous

condition. Inspect accessories prior

to use to ensure that they con tain no

cracks.

Consult your dealer for further information on the

appropriate accessories.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of DeWalt DCF813 T 3 in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Turkish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 17,47 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of DeWalt DCF813 T 3

DeWalt DCF813 T 3 Additional guide - English - 16 pages

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

DeWalt DCF813 T 3 Manual

Product: