790842
8
Zoom out
Zoom in
Previous page
1/126
Next page
8
GB Do not modify the laser in any way. Modifying the tool
may result in hazardous laser radiation exposure.
Do not operate the laser around children or allow
children to operate the laser. Serious eye injury may
result.
Do not remove or deface warning labels. If labels
are removed user or others may inadvertently expose
themselves to radiation.
Position the laser securely on a level surface. Damage
to the laser or serious injury could result if the laser falls.
Laser Information
The DCE089G, DCE089R 3-Beam 360° Line Laser and the
DCE0811G, DCE0811R 2-Beam 360° Line Laser are Class 2
laser products. The lasers are self-leveling laser tools that can
be used for horizontal (level) and vertical (plumb) alignment
projects.
WARNING:
Read and understand all instructions. Failure to
follow all instructions listed below may result in electric
shock, re and/or serious personal injury.
Work Area
Keep your work area clean and well lit. Cluttered benches
and dark areas invite accidents.
Do not operate laser tools in explosive atmospheres, such
as in the presence of ammable liquids, gases, or dust.
Keep children and bystanders away while operating a laser
tool. Distractions can cause you to lose control.
Electrical Safety
Use battery operated tool only with the specically
designed batteries. Use of any other batteries may create
a risk of re.
Product Overview
WARNING:
Never modify the tool or any part of it. Damage to the
laser or personal injury could result.
Figure 2 - Battery Interface A
Figure 1A - Pendulum Lock B
Figure 1B - Keypad C
Figure 1B - ON/OFF button: horizontal laser line D
Figure 1B - ON/OFF button: side laser line E
Figure 1B - ON/OFF button: front vertical laser line
(DCE089R/G only) F
Figure 2 - Magnetic pivot bracket G
Figure 4 - Tripod thread tting (1/4 - 20 & 5/8 -11) I
Figure 1B - Battery level indicator J
Figure 5 - Ceiling Mount Clamp K
Figure 5 - Ceiling Mount L
Figure 5 - Screw Hole M
Batteries and Power
This tool is powered by the following DeWALT 10.8V Battery
packs: DCB120, DCB127 or may also be powered using the
DEWALT AA Starter pack which can carry four AA batteries.
Note: The AA starter pack is recommended only for use with
the red laser.
Battery Installation and Removal
Using the AA Starter Pack:
CAUTION:
The AA starter pack is designed specically for
use only with the DeWALT 10.8V compatible laser
products and cannot be used with any other tools Do
not attempt to modify the product.
8


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for DeWalt DCE089R at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of DeWalt DCE089R in the language / languages: English, German, Dutch, Danish, French, Italian, Portuguese, Swedish, Turkish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 3.67 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info