790843

DeWalt DCE0811G Manual

13
Zoom out
Zoom in
Previous page
1/126
Next page
13
GB
The Laser Beams Flash
The lasers are designed to self-level up to an average of
4° in all directions If the laser is tilted so much that the
internal mechanism cannot level itself, the laser beams will
ash indicating that the tilt range has been exceeded. THE
FLASHING BEAMS CREATED BY THE LASER ARE NOT
LEVEL OR PLUMB AND SHOULD NOT BE USED FOR
DETERMINING OR MARKING LEVEL OR PLUMB. Try
repositioning the laser on a more level surface.
The Laser Beams Will Not Stop Moving
The laser is a precision instrument. Therefore, if it is not
positioned on a stable (and motionless) surface, the laser will
continue to try to nd level. If the beam will not stop moving, try
placing the laser on a more stable surface. Also, try to make
sure that the surface is relatively at, so that the laser is stable.
The Battery Meter Leds Flash
When all 4 LEDs continuously ash on the Battery Meter
this indicates that the unit has not been fully powered off using
the Pendulum Lock switch B. The Pendulum Lock switch
should always be placed in the LOCKED/OFF position when the
laser is not in use.
Accessories
WARNING:
Since accessories, other than those offered by
DeWalt, have not been tested with this product,
use of such accessories with this tool could be
hazardous. To reduce the risk of injury, only DeWalt
recommended accessories should be used with this
product.
Using the Laser with Accessories
(See Figure 2), inset)
The laser is equipped with both 1/4 - 20 and 5/8 - 11 female
threads (I) on the bottom of the unit. This thread is to
accommodate current or future DeWALT accessories. Only use
DeWALT accessories specied for use with this product. Follow
the directions included with the accessory.
Service and Repairs
• Note: Disassembling the laser level(s) will void all
warranties on the product.
To assure product SAFETY and RELIABILITY, repairs,
maintenance and adjustment should be performed by
authorized service centers. Service or maintenance performed
by unqualied personnel may result in a risk of injury. To locate
your nearest DeWALT service center go to www.2helpU.com
on the Internet.
1 Year Limited Warranty
DeWalt will repair, without charge, any defects due to faulty
materials or workmanship for one year from the date of
purchase. This warranty does not cover part failure due to
normal wear or tool abuse. For further detail of warranty
coverage and warranty repair information, visit www.dewalt.
com. This warranty does not apply to accessories or damage
caused where repairs have been made or attempted by others.
This warranty gives you specic legal rights and you may have
other rights which vary in certain states or provinces.
In addition to the warranty, DeWALT tools are covered by our:
1 Year Free Service
DeWalt will maintain the tool and replace worn parts caused by
normal use, free, any time during the rst year after purchase.
30 DAY no risk
satisfaction GUARANTEE
If you are not completely satised with the performance of your
DeWalt Laser, for any reason, you can return it within 30 days
from the date of purchase with a receipt for a full refund – no
questions asked.
Free Warning Label Replacement:
If your warning labels 1 become illegible or are missing, visit
www.dewalt.com for a free replacement.
… 13 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for DeWalt DCE0811G at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of DeWalt DCE0811G in the language / languages: English, German, Dutch, Danish, French, Italian, Portuguese, Swedish, Turkish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 3.67 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info