Manual DeWalt DC900KL T 1 (page 27 of 124) (English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Turkish, Spanish, Norwegian, Finnish)

549644

Zoom out

Zoom in

1/124

ENGLISH

The correct power tool will do the job better and

safer at the rate for which it was designed.

b Do not use the power tool if the switch does

not turn it on and off.

Any power tool that cannot be controlled with

the switch is dangerous and must be repaired.

c Disconnect the plug from the power source

and/or the battery pack from the power tool

before making any adjustments, changing

accessories, or storing power tools.

Such preventive safety measures reduce the

risk of starting the power tool accidentally.

d Store idle power tools out of the reach of

children and do not allow persons unfamiliar

with the power tool or these instructions to

operate the power tool.

Power tools are dangerous in the hands of

untrained users.

e Maintain power tools. Check for

misalignment or binding of moving parts,

breakage of parts and any other condition

that may affect the power tools operation.

If damaged, have the power tool repaired

before use.

Many accidents are caused by poorly

maintained power tools.

f Keep cutting tools sharp and clean.

Properly maintained cutting tools with sharp

cutting edges are less likely to bind and are

easier to control.

g Use the power tool, accessories and tool bits

etc., in accordance with these instructions,

taking into account the working conditions

and the work to be performed.

Use of the power tool for operations different

from those intended could result in a hazardous

situation.

5 Battery tool use and care

a Ensure the switch is in the off position

before inserting battery pack.

Inserting the battery pack into power tools that

have the switch on invites accidents.

b Recharge only with the charger speciﬁ ed by

the manufacturer.

A charger that is suitable for one type of battery

pack may create a risk of ﬁ re when used with

another battery pack.

c Use power tools only with speciﬁ cally

designated battery packs.

Use of any other battery packs may create

a risk of injury and ﬁ re.

d When battery pack is not in use, keep it

away from other metal objects like paper

clips, coins, keys, nails, screws, or other

small metal objects that can make a

connection from one terminal to another.

Shorting the battery terminals together may

cause burns or a ﬁ re.

e Under abusive conditions, liquid may be

ejected from the battery; avoid contact.

If contact accidentally occurs, ﬂ ush with

water. If liquid contacts eyes, additionally

seek medical help.

Liquid ejected from the battery may cause

irritation or burns.

6 Service

a Have your power tool serviced by a qualiﬁ ed

repair person using only identical

replacement parts.

This will ensure that the safety of the power tool

is maintained.

Additional safety instructions for impact drills

● Wear ear protectors with impact drills.

Exposure to noise can cause hearing loss.

● Use auxiliary handles supplied with the tool.

Loss of control can cause personal injury.

Additional safety instructions for battery packs

and chargers

● Make sure that the battery pack is dry and

clean before inserting it into the charger.

● Never carry the charger by its cord. Never pull

the cord to disconnect from the socket. Keep

the cord away from heat, oil and sharp edges.

● Have any damaged or defective cords replaced

by an authorised D

E WALT repair agent. Never

attempt any repairs yourself.

● Do not expose the charger to damp or wet

conditions.

● Do not attempt to charge wet battery packs.

● Never attempt to open a battery pack for any

reason.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of DeWalt DC900KL T 1 in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Turkish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 1,21 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

DeWalt DC900KL T 1 Manual

Product: