Manual DeWalt DC415 T 1 (page 38 of 180) (English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Turkish, Spanish, Spanish, Norwegian)

547552

Zoom out

Zoom in

1/180

ENGLISH

Mains plug replacement

(U.K. & Ireland only)

DANGER:

• Should your mains plug need replacing

and you are competent to do this,

proceed as instructed below. If you are

in doubt, contact an authorized D

EWALT

repair agent or a qualified electrician.

• Disconnect the plug from the supply.

• Cut off the plug and dispose of it safely;

a plug with bared copper conductors

is dangerous if engaged in a live socket

outlet.

• Only fit 13 Amperes BS1363A approved

plugs fitted with the correctly rated fuse

(1).

• The cable wire colours, or a letter, will be

marked at the connection points of most

good quality plugs. Attach the wires to

their respective points in the plug (see

below). Brown is for Live (L) (2) and Blue

is for Neutral (N) (4).

• Before replacing the top cover of the

mains plug ensure that the cable restraint

(3) is holding the outer sheath of the cable

firmly and that the two leads are correctly

fixed at the terminals crews.

WARNING: NEVER use a light socket.

NEVER connect the live (L) or

neutral (N) wires to the earth

pin marked E or .

Using an extension cable

An extension cord should not be used unless

absolutely necessary. Use an approved extension

cable suitable for the power input of your charger

(see technical data). The minimum conductor size is

1 mm

; the maximum length is 30 m.

Assembly and adjustment

WARNING: Prior to assembly and

adjustment, always remove the battery

pack. Always switch off the tool before

inserting or removing the battery pack.

WARNING: Use only DEWALT battery

packs and chargers.

Battery pack (ﬁ g. 1)

BATTERY TYPE

The DC413 operates on 28 V lithium ion battery

packs and the DC415 operates on 36 volt lithium

ion battery packs.

Charging the Battery Pack

Always check the mains prior to charging the battery

pack. If the mains is functioning but the battery pack

does not charge, take your charger to an authorised

DEWALT repair agent. Whilst charging, the charger

and the battery pack may become warm to touch.

This is a normal condition and does not indicate a

problem.

CAUTION: Do not charge the battery

pack at ambient temperatures < 4 °C

or > 40 °C. Recommended charging

temperature: approx. 24 °C.

To charge the battery pack (i), insert it into the

charger (l) as shown and plug in the charger. Be sure

that the battery pack is fully seated in the charger.

The red charging indicator (m) will blink according to

the state of charge of the battery pack.

When finished charging, the indicators are all on.

The charger automatically switches to equalise

mode.

The battery pack can be removed at any time or left

in the connected charger indefinitely.

The red charging indicators flash rapidly to indicate

a charging problem. Reinsert the battery pack or try

a new one. If the new pack also refuses to charge,

have your charger tested by an authorized DEWALT

repair agent.

The red charging indicators flash rapidly with one

short blink followed by a long blink to indicate a

problem with the charger. Return the charger to an

authorized DEWALT repair agent.

When plugged into power sources such as

generators or sources that convert DC to AC, the

red charging indicators (m) may flash together with

two fast blinks followed by a pause. This indicates

a temporary problem of the power source. The

charger will automatically switch back to normal

operation.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of DeWalt DC415 T 1 in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Turkish, Spanish, Spanish, Norwegian as an attachment in your email.

The manual is 5,49 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of DeWalt DC415 T 1

DeWalt DC415 T 1 Additional guide - Polish - 24 pages

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

DeWalt DC415 T 1 Manual

Product: