546383
42
Zoom out
Zoom in
Previous page
1/176
Next page
40
ENGLISH
For optimal results, move the tool
smoothly and constantly over the
workpiece. Do not exert lateral pressure
on the saw blade. Keep the shoe at on
the workpiece. When sawing curves,
circles or other round shapes, push the
tool gently forward.
Wait until the tool has come to a
standstill before removing the saw blade
from the workpiece. After sawing the
blade may be very hot. Do not touch.
Proper Hand Position (fi g. A, L)
WARNING: To reduce the risk of serious
personal injury, ALWAYS use proper
hand position as shown.
WARNING: To reduce the risk of serious
personal injury, ALWAYS hold securely in
anticipation of a sudden reaction.
Proper hand position requires one hand on the top
handle (15), with the other hand on the main handle
(23).
Switching on and off ( g. H)
For safety reasons your tool is equipped with a
safety lock.
To unlock the tool, release the safety lock (2).
To run the tool, press the variable speed switch
(1). The pressure exerted on the variable speed
switch determines the tool speed.
To stop the tool, release the switch.
To lock the tool in off position, activate the
safety lock.
WARNING: After using the tool for an
extended period on low speed settings,
run it for approx. 3 minutes on maximum
no-load speed.
Sawing in wood
If necessary, draw a cutting line.
Switch the tool on.
Hold the tool against the workpiece and follow
the line.
For sawing parallel to the edge of your workpiece,
install the parallel fence and guide your jigsaw
along the workpiece a shown in gure I.
Sawing in wood using a pilot hole
If necessary, draw a cutting line.
Drill a hole (ø min. 12 mm) and introduce the
saw blade.
Switch the tool on.
Follow the line.
For cutting perfectly round shapes, install the
trammel bar and set it to the required radius
( g. J).
Sawing up to a projecting edge ( g. K)
Using a conventional blade, cut up to the
projected edge.
Finish off the cut using a ush cutting blade.
Dust extraction ( g. G)
When the tool is used indoor for extended
periods of time, use a suitable dust extractor
designed in compliance with the applicable
Directives regarding dust emission.
Sawing in metal
Mount an appropriate saw blade.
Proceed as described above.
CAUTION: Use a cooling lubricant
(cutting oil) to prevent overheating of
the saw blade or the workpiece.
Optional accessories
WARNING: Since accessories, other
than those offered by DEWALT, have
not been tested with this product, use
of such accessories with this tool could
be hazardous. To reduce the risk of
injury, only DEWALT, recommended
accessories should be used with this
product.
Consult your dealer for further information on the
appropriate accessories.
These include:
– DE3241 Parallel guide
– DE3242 Trammel bar
42


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for DeWalt DC318KL at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of DeWalt DC318KL in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Turkish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 8,36 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info