Manual DeWalt D712N (page 32 of 112) (English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Turkish, Spanish, Norwegian, Finnish)

546145

Zoom out

Zoom in

1/112

ENGLISH

MAINTENANCE

Your DEWALT power tool has been designed to operate over a long

period of time with a minimum of maintenance. Continuous satisfactory

operation depends upon proper tool care and regular cleaning.

Cleaning

Keep the ventilation slots clear and regularly clean the housing with a

soft cloth.

• Regularly clean the table top.

• Regularly clean the dust collection system.

Avoid the use of cleaners or lubricants to maintain the tool.

In particular spray and aerosol cleaners may chemically

attack the plastic lower guard.

CLEANING AND MAINTAINING THE KERF PLATE (FIG. U)

Regularly clean the area below the kerf plate.If the kerf plate is worn it

must be replaced.

• Remove the screws (67) holding the kerf plate (31).

• Remove the kerf plate and clean the area below.

• Re-install the parts of the kerf plate and the screws.

• Tighten the screws hand-tight.

• To adjust the kerf plate, proceed as follows:

• Pull down the head until the blade just enters the saw kerf.

• Adjust each part of the kerf plate to fit closely to the teeth of the

blade.

• Tighten the screws.

Protecting the Environment

Separate collection. This product must not be disposed of with

normal household waste.

Should you ﬁnd one day that your DEWALT product needs replacement,

or if it is of no further use to you, do not dispose of it with household

waste. Make this product available for separate collection.

Separate collection of used products and packaging allows

materials to be recycled and used again. Re-use of

recycled materials helps prevent environmental pollution

and reduces the demand for raw materials.

Local regulations may provide for separate collection of electrical

products from the household, at municipal waste sites or by the retailer

when you purchase a new product.

DEWALT provides a facility for the collection and recycling of DEWALT

products once they have reached the end of their working life. To take

advantage of this service please return your product to any authorised

repair agent who will collect them on our behalf.

You can check the location of your nearest authorised repair agent by

contacting your local DEWALT office at the address indicated in this

manual. Alternatively, a list of authorised DEWALT repair agents and

full details of our after-sales service and contacts are available on the

Internet at: www.2helpU.com.

GUARANTEE

• 30 DAY NO RISK

SATISFACTION GUARANTEE •

If you are not completely satisfied with the performance of

your D

EWALT tool, simply return it within 30 days, complete

as purchased, to the point of purchase, for a full refund or

exchange. Proof of purchase must be produced.

• ONE YEAR FREE SERVICE CONTRACT •

If you need maintenance or service for your DEWALT tool,

in the 12 months following purchase, it will be undertaken

free of charge at an authorized DEWALT repair agent. Proof

of purchase must be produced. Includes labour and spare

parts for Power Tools. Excludes accessories.

• ONE YEAR FULL WARRANTY •

If your DEWALT product becomes defective due to faulty

materials or workmanship within 12 months from the date of

purchase, we guarantee to replace all defective parts free of

charge or, at our discretion, replace the unit free of charge

provided that:

• The product has not been misused.

• Repairs have not been attempted by unauthorized

persons.

• Proof of purchase date is produced. This guarantee

is offered as an extra benefit and is additional to

consumers statutory rights.

For the location of your nearest authorized DEWALT repair

agent, please use the appropriate telephone number on

the back of this manual. Alternatively, a list of authorized

DEWALT repair agents and full details on our after-sales

service are available on the Internet at www.2helpU.com.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of DeWalt D712N in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Turkish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 5,57 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

DeWalt D712N Manual

Product: