Manual DeWalt D712N (page 27 of 112) (English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Turkish, Spanish, Norwegian, Finnish)

546145

Zoom out

Zoom in

1/112

ENGLISH

• Check periodically that the motor air slots are clean and free of

chips.

• Replace the kerf plate when worn.

• Disconnect the machine from the mains before carrying out any

maintenance work or when changing the blade.

• Never perform any cleaning or maintenance work when the

machine is still running and the head is not in the rest position.

• When possible, always mount the machine to a bench.

Residual Risks

The following risks are inherent to the use of saws:

– injuries caused by touching the rotating parts

In spite of the application of the relevant safety regulations and the

implementation of safety devices, certain residual risks cannot be

avoided. These are:

– Impairment of hearing.

– Risk of accidents caused by the uncovered parts of the rotating

saw blade.

– Risk of injury when changing the blade.

– Risk of squeezing fingers when opening the guards.

– Health hazards caused by breathing dust developed when sawing

wood, especially oak, beech and MDF.

Labels on Tool

The following pictograms are shown on the tool:

Read the instruction manual before use

Safe use warning

Carrying point

Electrical Safety

The electric motor has been designed for one voltage only. Always

check that the power supply corresponds to the voltage on the rating

plate.

Your tool is double insulated in accordance with EN 61029;

therefore no earth wire is required.

In case of cord replacement the tool must only be repaired by an

authorized service agent or by qualified electrician.

Mains Plug Replacement

(U.K. & Ireland only)

• Should your mains plug need replacing and you are competent to

do this, proceed as instructed below. If you are in doubt, contact

an authorized DEWALT repair agent or a qualified electrician.

• Disconnect the plug from the supply.

• Cut off the plug and dispose of it safely; a plug with bared copper

conductors is dangerous if engaged in a live socket outlet.

• Only fit 13 Amperes BS1363A approved plugs fitted with the

correctly rated fuse (1).

• The cable wire colours, or a letter, will be marked at the connection

points of most good quality plugs. Attach the wires to their

respective points in the plug (see below). Brown is for Live (L) (2)

and Blue is for Neutral (N) (4).

• Before replacing the top cover of the mains plug ensure that the

cable restraint (3) is holding the outer sheath of the cable firmly and

that the two leads are correctly fixed at the terminal screws.

NEVER use a light socket.

NEVER connect the live (L) or

neutral (N) wires to the earth

pin marked E or .

For 115 V units with a power rating exceeding 1500 W, we recommend

tofit a plug to BS4343 standard.

Using an Extension Cable

If an extension cable is required, use an approved extension cable

suitable for the power input of this tool (see technical data). The

minimum conductor size is 1.5 mm

When using a cable reel, always unwind the cable completely. Also refer

to the table below.

Conductor size (mm

) Cable rating (Amperes)

0.75 6

1.00 10

1.50 15

2.50 20

4.00 25

Cable length (m)

7.5 15 25 30 45 60

Voltage Amperes Cable rating (Amperes)

230 0 – 2.0 6 6 6 6 6 6

2.1 – 3.4 6 6 6 6 6 6

3.5 – 5.0 6 6 6 6 10 15

5.1 – 7.0 10 10 10 10 15 15

7.1 – 12.0 15 15 15 15 20 20

12.1 – 20.0 20 20 20 20 25 –

Package Contents

The package contains:

1 Assembled mitre saw

1 Blade spanner

1 Saw blade

1 Instruction manual

1 Exploded drawing

• Check for damage to the tool, parts or accessories which may

have occurred during transport.

• Take the time to thoroughly read and understand this manual prior

to operation.

Description (ﬁ g. A1–A5)

Your DW712 mitre saw has been designed for professional cutting

of wood, wood products, aluminium and plastics. It will perform

the sawing operations of cross-cutting, bevelling and mitring easily,

accurately and safely.

1 On/off switch

2 Moveable lower guard

3 Fence left-hand side

4 Mitre lever

5 Mitre latch

6 Mitre scale

7 Fixed fence

8 Fence right-hand side

9 Bevel position adjustment stop

10 Bevel scale

11 Bevel clamp handle

12 Grooving stop

13 Rail lock knob

14 Head lock down pin

15 Grooving depth adjustment knob

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of DeWalt D712N in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Turkish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 5,57 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

DeWalt D712N Manual

Product: