Manual DeWalt D51823 T 2 (page 23 of 100) (English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Turkish, Spanish, Norwegian, Finnish)

546475

Zoom out

Zoom in

1/100

ENGLISH

• Have repairs carried out only by the manufacturer

or authorised agents having due regard to the

information given in the manual and using the

appropriate tools and equipment.

• Do not disassemble or block any parts of the

fastener driving tool such as the safety yoke.

• Have the tool serviced properly and at regular

intervals.

The following pictograms are shown on the tool:

Pneumatic tool with safety yoke.

Do not use on a ladder.

Compatible nail angles.

Maximum number of nails in magazine.

Nail diameter.

Nail length.

Max. operating pressure.

Nail type: full round head.

Nail type: clipped head.

Package contents

The package contains:

1 Nailer

1 Sequential action trigger

1 Pair of safety glasses

1 Bottle of DEWALT pneumatic tool oil

1 Instruction manual

1 Exploded drawing

• Check for damage to the tool, parts or accessories

which may have occurred during transport.

• Take the time to thoroughly read and understand

this manual prior to operation.

Description (fig. A)

Your nailer D51823/D51845 has been designed for

driving fasteners into wooden workpieces.

1 Trigger/lock-off switch

2 Air fitting

3 Contact trip

4 Magazine

Assembly and adjustment

Trigger selection

These tools are assembled with a bump action

trigger. A sequential action trigger is also included

with the original packaging. For definitions of “bump

action” and “sequential action”, see below.

- The grey trigger with a single nail printed on the

side is the sequential action trigger. Installation of

this kit causes the tool to function in sequential

action mode.

- The black trigger with three nails printed on the

side is the bump action trigger. Installation of this

kit causes the tool to function in bump action

mode.

Removing the trigger (fig. B)

• Disconnect the airline from the tool.

• Remove all nails from the magazine.

• Remove the rubber grommet (5) from the end of

the dowel pin (6).

• Remove the dowel pin.

• Remove the trigger assembly (7).

Fitting the trigger (fig. B)

• Select the appropriate trigger.

• Insert the trigger assembly into the trigger cavity,

ensuring that the trigger spring (8) is properly

seated.

• Ensure that the contact trip guide (9) is pushed

fully upward so that it is flush with the tool

housing and aligned with the housing holes (10).

• Insert the dowel pin (6) through the tool frame,

contact trip guide and trigger assembly.

• Push the rubber grommet (5) onto the end of the

dowel pin.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of DeWalt D51823 T 2 in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Turkish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 1,09 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

DeWalt D51823 T 2 Manual

Product: