446565
27
Zoom out
Zoom in
Previous page
1/105
Next page
27
ENGLISH
Release the unlocking switch (3).
For continuous operation, press and hold down
the switch (1), press the lock-on button (2) and
release the switch.
To stop the tool, release the switch.
To stop the tool in continuous operation, press
the switch brie y and release it. Always switch
off the tool when work is nished and before
unplugging.
On/off switch (1) with unlocking switch (3)
(France only)
To run the tool, depress the unlocking switch (3)
and subsequently operate the on/off switch (1).
Release the unlocking switch (3).
To stop the tool, release the switch.
@
Do not switch the tool on or off when
under load.
Metal applications
When using the tool in metal applications, make
sure that a residual current device (RCD) has
been inserted to avoid residual risks caused by
metal swarf.
If the power supply is shut off by the RCD, take
the tool to authorised D
E WALT repair agent.
!
In extreme working conditions,
conductive dust can accumulate inside
the machine housing when working with
metal. This can result in the protective
insulation in the machine becoming
degraded with a potential risk of an
electrical shock.
To avoid build-up of metal swarf inside the
machine, we recommend to clear the ventilation
slots on a daily basis. See "Maintenance".
Consult your dealer for further information on the
appropriate accessories.
Maintenance
Your D E WALT power tool has been designed to
operate over a long period of time with a minimum
of maintenance. Continuous satisfactory operation
depends upon proper tool care and regular cleaning.
A
Lubrication
Your power tool requires no additional lubrication.
S
Cleaning
Keep the ventilation slots clear and regularly clean
the housing with a soft cloth.
Clearing the ventilation slots
To avoid build-up of dust inside the machine,
we recommend to clear the ventilation slots on
a daily basis.
Unplug the machine.
Blow dry compressed air through the ventilation
slots.
Clear the ventilation slots using a soft brush or
dry cloth. Do not use metallic objects as these
might damage the internal parts.
Protecting the environment
Z
Separate collection. This product must
not be disposed of with normal
household waste.
Should you nd one day that your D E WALT product
needs replacement, or if it is of no further use to
you, do not dispose of it with household waste.
Make this product available for separate collection.
z
Separate collection of used products
and packaging allows materials to be
recycled and used again. Re-use of
recycled materials helps prevent
environmental pollution and reduces
the demand for raw materials.
Local regulations may provide for separate
collection of electrical products from the
household, at municipal waste sites or by the
retailer when you purchase a new product.
D E WALT provides a facility for the collection and
recycling of D
E WALT products once they have
27


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for DeWalt D28492(K) at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of DeWalt D28492(K) in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Turkish, Spanish, Spanish, Norwegian as an attachment in your email.

The manual is 1,08 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info