Manual DeWalt D28492(K) (page 24 of 105) (English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Turkish, Spanish, Spanish, Norwegian)

446565

Zoom out

Zoom in

1/105

ENGLISH

Do not cut or grind light metal with a

magnesium content exceeding 80%

since this type of metal is ﬂ ammable.

● Do not use any accessories other than ﬁ bre

reinforced grinding and cutting discs.

● Use only plain or depressed-centre grinding

and cutting discs.

● Use the grinding and cutting discs recommended

by the manufacturer only.

● The max. allowable speed of the grinding wheel

or cutting disc, or any other suitable accessory,

must always be equal to or greater than the

no-load speed of the tool speciﬁ ed on the

nameplate.

● Do not cut workpieces requiring a maximum

depth of cut exceeding that of the cutting disc.

● Do not use grinding and cutting discs that do

not conform to the dimensions stated in the

technical data. Do not use any spacers to make

a disc ﬁ t onto the spindle. Do not separate

reducing bushings or adapters to adapt large-

hole abrasive wheels.

● Inspect grinding and cutting discs before each

use. Do not use chipped, cracked or otherwise

defective discs.

● If provided, ensure that blotters are used when

the disc is ﬁ tted onto the spindle.

● When applying a threaded hole disc, ensure that

the thread is long enough to accept the spindle.

● Ensure that the grinding or cutting disc is

mounted correctly before use.

● Let the tool run at no-load in a safe position for

at least 30 seconds. If there is a considerable

vibration or if any other defect occurs, stop the

tool and check it to determine the cause.

● Do not operate this tool without the guard in place.

● Check that the workpiece is properly supported.

● Do not operate the tool near ﬂ ammable liquids,

gases or dust. Sparks or hot chips from cutting

or arcing motor brushes may ignite combustible

materials.

● Do not operate the tool while standing in line

with the disc. Keep other persons away from

the work area.

● Do not use cutting discs for side grinding.

● Do not operate the spindle lock while the tool is

running.

● Beware that after switching off the tool the

wheel continues to rotate for a short period.

● Always store grinding and cutting discs

in a dry place.

Labels on tool

The following pictographs are shown on the tool:

Read the instruction manual before use

Wear safety glasses

Wear ear protection

Package contents

The package contains:

1 Angle grinder

1 Guard

1 Side handle

1 Flange set

1 Two-pin spanner

1 Kitbox (K-models only)

1 Instruction manual

1 Exploded drawing

● Check for damage to the tool, parts or

accessories which may have occurred during

transport.

● Take the time to thoroughly read and

understand this manual prior to operation.

Description (ﬁ g. A)

Your angle grinder D28490/D28491/D28492(K)/

D28493 has been designed for professional

grinding and cutting applications.

1 On/off switch

2 Locking switch (not for France)

3 Unlocking switch

4 Spindle lock

5 Guard

6 Side handle

Electrical safety

The electric motor has been designed for one

voltage only. Always check that the power supply

corresponds to the voltage on the rating plate.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of DeWalt D28492(K) in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Turkish, Spanish, Spanish, Norwegian as an attachment in your email.

The manual is 1,08 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

DeWalt D28492(K) Manual

Product: