546958
61
Zoom out
Zoom in
Previous page
1/132
Next page
59
ITALIANO
Il Vostro utensile DEWALT è fornito di
doppio isolamento, in ottemperanza alla
norma EN 60745, perciò non è richiesta
la messa a terra.
CH
PER LA SOSTITUZIONE DEL CAVO DI
ALIMENTAZIONE, UTILIZZARE SEMPRE
LA SPINA DI TIPO PRESCRITTO.
TIPO 11 PER LA CLASSE II
(DOPPIO ISOLAMENTO) - UTENSILI ELETTRICI
TIPO 12 PER LA CLASSE I
(MESSA A TERRA) - UTENSILI ELETTRICI
CH
GLI APPARECCHI PORTATILI, UTILIZZATI
IN AMBIENTE ESTERNO, DEVONO ESSE-
RE COLLEGATI AD UN INTERRUTTORE
DIFFERENZIALE.
SOSTITUZIONE DEL CAVO O DELLA SPINA
Quando occorre sostituire la spina, smaltire la spina
vecchia in modo appropriato; è pericoloso inserire
una spina con i conduttori di rame scoperti in una
presa di corrente sotto tensione.
Impiego di una prolunga
In caso di impiego di una prolunga, quest’ultima dovrà
essere di tipo omologato e di dimensione idonee a
garantire l’alimentazione elettrica dell’apparecchio
(vedere le caratteristiche tecniche). La dimensione
minima del conduttore è 1,5 mm
2
. Se si utilizza un
avvolgitore, estrarre il cavo per l’intera lunghezza.
Assemblaggio e regolazione
AVVERTENZA: Prima di effettuare il
montaggio o la regolazione disinserire
sempre la spina dalla presa di
alimentazione.
MONTAGGIO E SMONTAGGIO DELLA PROTEZIONE
(FIG. B1 & B2)
D28111/D28139 - PROTEZIONE CON VITE DI FISSAGGIO
(FIG. B1)
Collocare la smerigliatrice angolare su un piano,
con l’alberino rivolto verso l’alto.
Allineare le linguette (5) alle fessure (6).
Spingere in basso la protezione e ruotarla in
posizione.
Stringere saldamente la vite (7).
Per rimuovere la protezione allentare la vite.
AVVERTENZA: Non usare mai
l’elettroutensile senza la protezione.
D28113(K)/D28130/D28132C/D28134/D28135(K)/D28141 -
PROTEZIONE AUTOSERRANTE (FIG. B2)
Collocare la smerigliatrice angolare su un piano,
con l’alberino rivolto verso l’alto.
Sbloccare il fermo di bloccaggio (8) e tenere la
protezione (3) sopra l’elettroutensile, come illustrato.
Allineare le linguette (5) alle fessure (6).
Spingere in basso la protezione e ruotarla in
posizione.
Se necessario, aumentare la forza di bloccaggio
serrando la vite (9).
Stringere il fermo di bloccaggio.
Per togliere la protezione, sbloccare il fermo
di bloccaggio.
AVVERTENZA: Non usare mai
l’elettroutensile senza la protezione.
MONTAGGIO E SMONTAGGIO DELLA MOLA O DEL DISCO DA
TAGLIO (FIG. C1 & C2)
Mettere la smerigliatrice angolare su un piano,
con la protezione rivolta verso l’alto.
Inserire correttamente la fl angia interna (10)
sull’alberino (11) (fi g. C1).
Collocare il disco (12) sulla fl angia (10). Se la mola
o il disco sono sollevati al centro, accertare che
l’area in rilievo (13) sia rivolta verso la fl angia (10).
Avvitare la fl angia esterna (14) sull’alberino (11)
(fi g. C2):
- quando si installa una mola (A), l’anello della
angia (14) deve essere rivolto verso la mola;
- quando si installa un disco da taglio (B),
l’anello della fl angia (14) deve essere rivolto in
direzione opposta al disco.
Premere il fermo dell’alberino (2) e ruotare
l’alberino (11) fi no a che non si blocca in posizione.
Serrare la fl angia (14) utilizzando la chiave a due
naselli in corredo.
61


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for DeWalt D28132C T 1 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of DeWalt D28132C T 1 in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Turkish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 3,9 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info