546215
25
Zoom out
Zoom in
Previous page
1/26
Next page
23
ENGLISH
Loosen the screw (140) of the adjustment cam (141).
Rotate the adjustment cam using a pair of needle nose pliers.
Hold the adjustment cam with the pliers and tighten the screw.
Replace the retainer plate and tighten the screws.
Rotate the machine into mitre saw mode. Check the force that is
needed to mitre the saw. Repeat the above steps if the force needed is
too high.
Cleaning
Before use, carefully check the upper blade guard, movable lower blade
guard as well as the dust extraction tube to determine that it will operate
properly. Ensure that chips, dust or workpiece particle cannot lead to
blockage of one of the functions.
In case of workpiece fragments jammed between saw blade and guards
disconnect the machine from the power supply and follow the instructions
given in section Mounting the Saw Blade. Remove the jammed parts and
reassembling the saw blade.
WARNING: Blow dirt and dust out of the main housing with dry
air as often as dirt is seen collecting in and around the air vents.
Wear approved eye protection and approved dust mask when
performing this procedure.
WARNING: Never use solvents or other harsh chemicals for
cleaning the non-metallic parts of the tool. These chemicals
may weaken the materials used in these parts. Use a cloth
dampened only with water and mild soap. Never let any liquid
get inside the tool; never immerse any part of the tool into a
liquid.
WARNING:: To reduce the risk of injury, regularly clean the
table top.
WARNING: To reduce the risk of injury, regularly clean the
dust collection system.
Optional Accessories
WARNING: Since accessories, other than those offered by
DEWALT, have not been tested with this product, use of such
accessories with this tool could be hazardous. To reduce the
risk of injury, only DEWALT, recommended accessories should
be used with this product.
LASER WARNING:
LASER RADIATION: DO NOT STARE INTO BEAM
CLASS 2 PRODUCT
MAXIMUM OUTPUT POWER
P = < 1 mW;
peak
= 630 nm –680 nm
IEC 60825-1: 2007
Consult your dealer for further information on the appropriate accessories.
Protecting the Environment
Separate collection. This product must not be disposed of with
normal household waste.
Should you find one day that your DEWALT product needs replacement, or
if it is of no further use to you, do not dispose of it with household waste.
Make this product available for separate collection.
Separate collection of used products and packaging allows
materials to be recycled and used again. Re-use of recycled
materials helps prevent environmental pollution and reduces the
demand for raw materials.
Local regulations may provide for separate collection of electrical products
from the household, at municipal waste sites or by the retailer when you
purchase a new product.
DEWALT provides a facility for the collection and recycling of DEWALT
products once they have reached the end of their working life. To take
advantage of this service please return your product to any authorised repair
agent who will collect them on our behalf.
You can check the location of your nearest authorised repair agent by
contacting your local D
EWALT office at the address indicated in this manual.
Alternatively, a list of authorised DEWALT repair agents and full details
of our after-sales service and contacts are available on the Internet at:
www.2helpU.com.
GUARANTEE
DEWALT is confident of the quality of its products and offers an
outstanding guarantee for professional users of the product.
This guarantee statement is in addition to and in no way
prejudices your contractual rights as a professional user or
your statutory rights as a private non-professional user. The
guarantee is valid within the territories of the Member States of
the European Union and the European Free Trade Area.
30 DAY NO RISK
SATISFACTION GUARANTEE
If you are not completely satisfied with the performance of your
DEWALT tool, simply return it within 30 days, complete with all
original components, as purchased, to the point of purchase,
for a full refund or exchange. The product must have been
subject to fair wear and tear and proof of purchase must be
produced.
ONE YEAR FREE SERVICE CONTRACT
If you need maintenance or service for your DEWALT tool,
in the 12 months following purchase, it will be undertaken
free of charge at an authorised DEWALT repair agent. Proof
of purchase must be produced. Includes labour. Excludes
accessories and spare parts unless failed under warranty.
ONE YEAR FULL WARRANTY
If your DEWALT product becomes defective due to faulty
materials or workmanship within 12 months from the date of
purchase, DEWALT guarantees to replace all defective parts
free of charge or – at our discretion – replace the unit free of
charge provided that:
The product has not been misused;
The product has been subject to fair wear and tear;
Repairs have not been attempted by unauthorised
persons;
Proof of purchase is produced;
The product is returned complete with all original
components.
If you wish to make a claim, contact your seller or check the
location of your nearest authorised DEWALT repair agent in
the DEWALT catalogue or contact your DEWALT office at the
address indicated in this manual. A list of authorised DEWALT
repair agents and full details of our after-sales service is
available on the Internet at: www.2helpU.com.
25


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for DeWalt D27105 T 3 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of DeWalt D27105 T 3 in the language / languages: English as an attachment in your email.

The manual is 7,28 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info