544660
7
Zoom out
Zoom in
Previous page
1/20
Next page
ENGLISH
3
HAMMER TRUCK D259801
FOR USE WITH D25980
WARNING: Improper operation or
maintenance of this product could result
in serious injury and property damage.
Read and understand all warnings and
operating instructions in the pavement
breaker's instruction manual before
operating or performing maintenance on
this equipment.
WARNING: Turn off the pavement
breaker and unplug from the power
source before making any adjustments
or removing or installing attachments or
accessories.
CONTENTS (fi g. 1–3)
a. Handle
b. Strap
c. Max load 165 lbs. (75 kg) warning label
d. Handle hardware: 2 bolts, 2 nuts, 2 curved
washers
e. Base plate hardware: 2 bolts, 2 nuts, 4 flat
washers
f. Wrenches (2)
ASSEMBLY (fi g. 1–3)
Handle
Align the tubes on the handle (a) with the tubes on
the hammer truck body. Firmly push handle down to
align holes. Using the wrench supplied, secure with
handle hardware (d).
Base plate
Unfold the base plate. Using the wrench supplied,
install the base plate hardware (e). Secure the base
plate by tightening all four bolts (e, g).
Usage (Fig. 5–7)
1. Remove hook (h).
2. Place pavement breaker (i) onto hammer truck.
NOTE: If bit is attached, place bit in the base
plate groove (j). If the bit is not attached, pull
up on knob (k), move base plate peg (l) into
the center position and release knob. Place
pavement breaker on base plate peg.
3. Replace hook (h). Adjust the strap (b) to the
desired height by moving the hook (h) and loop
(m) up and down.
4. Secure pavement breaker to hammer truck by
tightening strap (b).
5. Wrap power cord around the quick-release cord
wrap levers (n).
QUICK-RELEASE CORD WRAP (FIG. 6)
Pull one or both of the quick-release cord wrap
levers (n) and rotate the levers to release the cord
wrap.
Transporting
WARNING: Risk of unsafe operation.
Ensure proper footing and use caution
when rolling hammer truck so it does
not tip or cause loss of balance.
WARNING: Risk of unsafe operation.
Do not exceed load limit of 165 lbs.
(75 kg). Personal injury may result.
Refer to warning label (c).
CAUTION: Risk of unsafe operation. Do
not transport unsecured tool. Personal
injury may result.
1. With pavement breaker (i) secured, grasp
handle (a) and slowly tilt hammer truck back so
it can be rolled on the tyres.
2. When location is reached, slowly lower hammer
truck to rest on base plate.
7


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for DeWalt D259801K at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of DeWalt D259801K in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Turkish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 1,98 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info