Manual DeWalt D25961K (page 30 of 124) (English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Turkish, Spanish, Norwegian, Finnish)

544655

Zoom out

Zoom in

1/124

ENGLISH

5. To remove a chisel pull back the retainer (d) and

pull the chisel out of the tool holder (e).

D25961

TO FIT A CHISEL WITH GROOVE IN THE SHANK (FIG. 4C)

1. Pull the retainer bolt (i) and turn it by 180° to the

unlock position.

2. Hold the chisel in front of the tool holder with

the groove (h) facing upwards.

3. Insert the chisel shank into the tool holder (e).

4. Pull the retainer bolt (i) and turn it by 180° back

to the lock position.

5. Pull on the chisel to check if it is properly

locked. The hammering function requires

the chisel to be able to move axially several

centimetres when locked in the tool holder.

6. To remove a chisel pull the retainer bolt (i) and

turn it by 180° to the unlock position.

Adjusting the Side Handle (ﬁ g. 1)

The side handle (f) is assembled on the machine to

suit both right- and left-hand users.

WARNING: Always operate the

machine with the side handle properly

mounted.

1. Loosen the clamp knob (c) and rotate the side

handle to the desired position.

2. Lock the side handle in place by tightening the

clamp knob (c).

OPERATION

Instructions for Use

WARNING:

• Always observe the safety instructions

and applicable regulations.

• Be aware of the location of pipework and

wiring.

• Apply a pressure of approx. 20 - 30 kg

to the tool. Excessive force does not

speed up chiselling but decreases tool

performance and may shorten tool life.

Proper Hand Position (ﬁ g. 2)

WARNING: To reduce the risk of

serious personal injury, ALWAYS use

proper hand position as shown.

WARNING: To reduce the risk of

serious personal injury, ALWAYS hold

securely in anticipation of a sudden

reaction.

IMPORTANT: The tool must be held with two hands

at all times when in use.

Horizontal applications (fig. 2A):

Proper hand position requires one hand on the side

handle (f) and the other hand on the main handle (b).

Vertical applications (fig. 2B):

Proper hand position requires both hands on the

main handle (b).

Switching On and Off (ﬁ g. 1)

Switching on: set the on/off switch (a) to position 1.

Switching off: set the on/off switch (a) to position 0.

Demolition, Chasing and Channelling

(ﬁ g. 1, 2)

1. Select the appropriate chisel, and clean its

shank.

2. Insert the chisel and check whether it is properly

locked.

3. Fit and adjust the side handle (f) and make sure

it is firmly tightened.

4. Hold the tool with two hands on the main

handle (b) or one hand on the main handle (b)

and one hand on the side handle (f). The tool

must be held with two hands at all times when

in use. Refer to Proper Hand Postion.

5. Switch on tool to run in continuous operation.

6. Always switch off the tool when work is finished

and before unplugging.

Various types of chisels are available as an option.

Only DEWALT recommended accessories should be

used with this product.

MAINTENANCE

Your DEWALT power tool has been designed to

operate over a long period of time with a minimum

of maintenance. Continuous satisfactory operation

depends upon proper tool care and regular cleaning

This machine is not user-serviceable. Take the tool

to an authorised D

EWALT repair agent periodically.

If problems occur before this time contact an

authorised DEWALT repair agent.

Accessory Maintenance (ﬁ g. 5, 6)

WARNING: These chisels can be

reground only a limited number of

times. If in doubt, contact your dealer for

recommendations.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of DeWalt D25961K in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Turkish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 3,73 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

DeWalt D25961K Manual

Product: