Manual DeWalt D25830K T 3 (page 29 of 120) (English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Turkish, Spanish, Spanish, Norwegian)

544667

Zoom out

Zoom in

1/120

ENGLISH

tool is extremely versatile and adaptable for many

different applications. The required setting is a matter

of experience, e.g.,

– When chiselling soft, brittle materials or when

minimum break-out is required, set the dial

to 1 or 2 (low);

– When breaking harder materials, set the dial

to 7 (full power).

Assembling and Fitting the Side

Handle (ﬁ g. 7)

The side handle (h) can be mounted on either side of

the machine to suit both RH- and LH-users.

WARNING: Always operate the

tool with the side handle properly

assembled.

1. Snap the steel ring (m) over the collar (g) behind

the tool holder (f). Squeeze both ends together,

mount the bush (k) and insert the pin (l).

2. Place the side handle (h) and screw on the

clamp knob (i). Do not tighten.

3. Rotate the side handle mounting assembly to

the desired position.

4. Lock the side handle mounting assembly in

place by tightening the clamp knob (i).

OPERATION

Instructions for Use

WARNING:

• Always observe the safety instructions

and applicable regulations.

• For your own safety, always use the

tool with both hands.

• Be aware of the location of pipework

and wiring.

• Apply a pressure of approx. 20 kg

to the tool. Excessive force does not

speed up chiselling but decreases tool

performance and may shorten tool life.

Proper Hand Position (ﬁ g. 1, 8)

WARNING: To reduce the risk of

serious personal injury, ALWAYS use

proper hand position as shown.

WARNING: To reduce the risk of

serious personal injury, ALWAYS hold

securely in anticipation of a sudden

reaction.

Proper hand position requires one hand on the

side handle (h), with the other hand on the main

handle (j).

Switching On and Off (ﬁ g. 9)

To turn the tool on, press the on/off switch (a).

For continuous operation, press the lock-on button

(n) on the on/off switch.

To stop the tool, release the switch.

Chipping and Chiselling (ﬁ g. 1, 6)

1. Insert the appropriate chisel and rotate it by

hand to lock it into one of 8 positions.

2. Set the electronic speed and impact control dial

(b).

3. Fit and adjust the side handle (h).

4. Switch on the tool and start working.

5. Always turn the tool off when work is finished

and before unplugging.

MAINTENANCE

Your DEWALT power tool has been designed to

operate over a long period of time with a minimum

of maintenance. Continuous satisfactory operation

depends upon proper tool care and regular cleaning.

WARNING: To reduce the risk of

injury, turn unit off and disconnect

machine from power source before

installing and removing accessories,

before adjusting or changing set-ups

or when making repairs. Be sure the

trigger switch is in the OFF position. An

accidental start-up can cause injury.

Tool maintenance has to be carried out as soon as

the indicator LED lights up.

This machine is not user-serviceable. Take the

tool to an authorised D

EWALT repair agent after

approximately 80 hours of use. If problems occur

before this time contact an authorised D

EWALT

repair agent.

Accessory Maintenance

Accessory maintenance at the right time guarantees

optimal results in application and a long and efficient

accessory life.

Grind the chisels on grinding discs. Refer to figure 10

for the appropriate angles of the following chisels:

o. Spade-shaped chisel

p. Cold chisel

q. Pointed chisel

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of DeWalt D25830K T 3 in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Turkish, Spanish, Spanish, Norwegian as an attachment in your email.

The manual is 3,73 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

DeWalt D25830K T 3 Manual

Product: