Manual DeWalt D25500K T-1 (page 26 of 100) (English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Turkish, Spanish, Spanish, Norwegian)

544498

Zoom out

Zoom in

1/100

ENGLISH

Switching on and off (fig. A)

• To switch on the tool, press the on/off switch (1).

• To stop the tool, release the switch.

Drilling with a solid bit (fig. A)

• Insert the appropriate drill bit.

• Set the mode selector switch (4) to the “hammer

drilling” position.

• Set the electronic speed and impact control dial (2).

• Fit and adjust the side handle (8).

• If necessary, set the drilling depth.

• Mark the spot where the hole is to be drilled.

• Place the drill bit on the spot and switch on the

tool.

• Always switch off the tool when work is finished

and before unplugging.

Drilling with a core bit (fig. A)

• Insert the appropriate core bit.

• Assemble the centerdrill into the core bit.

• Set the mode selector switch (4) to the “hammer

drilling” position.

• Turn the electronic speed and impact control dial

(2) to a medium or high speed setting.

• Fit and adjust the side handle (8).

• Place the centerdrill on the spot and switch on

the tool. Drill until the core penetrates into the

concrete approx. 1 cm.

• Stop the tool and remove the centerdrill. Place the

core bit back into the hole and continue drilling.

When drilling through a structure thicker than the

depth of the core bit, break away the round

cylinder of concrete or core inside the bit at

regular intervals.

• To avoid unwanted breaking away of concrete

around the hole, first drill a hole the diameter of

the centerdrill completely through the structure.

Then drill the cored hole halfway from each side.

• Always switch off the tool when work is finished

and before unplugging.

Chipping and chiselling (fig. A)

• Insert the appropriate chisel and rotate it by hand

to lock it into one of 8 positions.

• Set the mode selector switch (4) to the

“hammering only” position.

• Set the electronic speed and impact control dial

(2).

• Fit and adjust the side handle (8).

• Switch on the tool and start working.

• Always switch off the tool when work is finished

and before unplugging.

Various types of SDS-max

drill bits and chisels are

available as an option.

Consult your dealer for further information on the

appropriate accessories.

Maintenance

Your DEWALT Power Tool has been designed to

operate over a long period of time with a minimum

of maintenance. Continuous satisfactory operation

depends upon proper tool care and regular cleaning.

Tool maintenance has to be carried out as soon as

the indicator LED lights up.

• This machine is not user-serviceable. Take the

tool to an authorised DEWALT repair agent after

approximately 80 hours of use. If problems occur

before this time contact an authorised DEWALT

repair agent.

Lubrication

Your power tool requires no additional lubrication.

Cleaning

Keep the ventilation slots clear and regularly clean

the housing with a soft cloth.

Unwanted tools and the environment

Take your tool to an authorized DEWALT repair

agent where it will be disposed of in an

environmentally safe way.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of DeWalt D25500K T-1 in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Turkish, Spanish, Spanish, Norwegian as an attachment in your email.

The manual is 0,93 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

DeWalt D25500K T-1 Manual

Product: