Manual DeWalt D25330K T 3 (page 26 of 116) (English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Turkish, Spanish, Norwegian, Finnish)

544664

Zoom out

Zoom in

1/116

ENGLISH

• Wear safety goggles or other eye protection.

Hammering and drilling operations cause chips

to fly. Flying particles can cause permanent eye

damage. Wear a dust mask or respirator for

applications that generate dust.

• Hammer bits and tools get hot during

operation. Wear gloves when touching them.

• Keep a firm grip on the tool at all times.

Do not attempt to operate this tool

without holding it with both hands. It is

recommended that the side handle be used at

all times. Operating this tool with one hand will

result in loss of control. Breaking through or

encountering hard materials such as re-bar may

be hazardous as well.

• Do not operate this tool for long periods of

time. Vibration caused by hammer action may

be harmful to your hands and arms. Use gloves

to provide extra cushion and limit exposure by

taking frequent rest periods.

• Do not recondition bits yourself. Chisel

reconditioning should be done by an authorized

specialist. Improperly reconditioned chisels

could cause injury.

• Never lay the tool down until the bit has

come to a complete stop. Moving bits could

cause injury.

• Do not strike jammed bits with a hammer to

dislodge them. Fragments of metal or material

chips could dislodge and cause injury.

• Slightly worn chisels can be resharpened by

grinding.

• Keep the power cord away from the rotating

bit. Do not wrap the cord around any part of

your body. An electric cord wrapped around a

spinning bit may cause personal injury and loss

of control.

Residual Risks

The following risks are inherent to the use of

chipping hammers:

– Injuries caused by touching the hot parts of the

tool.

In spite of the application of the relevant safety

regulations and the implementation of safety

devices, certain residual risks cannot be avoided.

These are:

– Impairment of hearing.

– Risk of squeezing fingers when changing the

accessory.

– Health hazards caused by breathing dust

developed when working in concrete and/or

masonry.

Markings on Tool

The following pictograms are shown on the tool:

Read instruction manual

before use.

Wear ear protection.

Wear eye protection.

DATE CODE POSITION (FIG. 1)

The Date Code (h), which also includes the year of

manufacture, is printed into the housing.

Example:

2012 XX XX

Year of Manufacture

Package Contents

The package contains:

1 Chipping hammer

1 Side handle

1 Kitbox (K models)

1 Instruction manual

1 Exploded drawing

• Check for damage to the tool, parts or

accessories which may have occurred during

transport.

• Take the time to thoroughly read and

understand this manual prior to operation.

Description (ﬁ g. 1)

WARNING: Never modify the power

tool or any part of it. Damage or

personal injury could result.

a. On/off switch

b. Lock-on slider

c. Chisel position index collar

d. Tool holder/locking sleeve

e. Dust cover

f. Side handle

g. Main handle

INTENDED USE

Your chipping hammer has been designed for light

chipping, chiselling and demolition applications.

DO NOT use under wet conditions or in presence of

flammable liquids or gases.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of DeWalt D25330K T 3 in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Turkish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 3,54 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

DeWalt D25330K T 3 Manual

Product: