Manual DeWalt D25112C (page 35 of 140) (English, German, Dutch, Danish, French, Italian, Portuguese, Swedish, Turkish, Spanish, Norwegian, Finnish)

446423

Zoom out

Zoom in

1/140

E N G L I S H

- Insert the special SDS-plus® screwdriving

adaptor for use with hexagonal screwdriver

bits (D25112(C)K/D25113K/D25213K).

- Replace the tool holder with the chuck

(D25114K).

● Insert the appropriate screwdriver bit.

When driving slotted head screws always use

bits with a ﬁnder sleeve.

● Gently press the variable speed switch (1) to

prevent damage to the screw head. In reverse

(LH) rotation the tool speed is automatically

reduced for easy screw removal.

● When the screw is ﬂush with the workpiece,

release the variable speed switch to prevent the

screw head from penetrating into the workpiece.

D25113K/D25114K/D25213K -

Chipping and chiselling (ﬁg. A)

● Set the mode selector switch (4) to the

"hammering only" position.

● Insert the appropriate chisel and rotate it by

hand to lock it into one of 51 positions.

● Adjust the side handle (9) as required.

● Switch on the tool and start working.

● Always switch off the tool when work is ﬁnished

and before unplugging.

● Do not use this tool to mix or pump

easily combustible or explosive ﬂuids

(benzine, alcohol, etc.).

● Do not mix or stir inﬂammable liquids

labelled accordingly.

Optional accessories

Various types of SDS-plus

drill bits and chisels

are available as an option.

Consult your dealer for further information on the

appropriate accessories.

Maintenance

Your DEWALT power tool has been designed to

operate over a long period of time with a minimum

of maintenance. Continuous satisfactory operation

depends upon proper tool care and regular

cleaning.

● This machine is not user-serviceable. Take the

tool to an authorised DEWALT repair agent after

approximately 40 hours of use.

If problems occur before this time contact an

authorised DEWALT repair agent.

● The tool will automatically switch off when the

carbon brushes are worn.

Lubrication

Your power tool requires no additional lubrication.

Accessories and attachments used must be

regularly lubricated around the SDS-plus

ﬁtment.

Cleaning

Keep the ventilation slots clear and regularly clean

the housing with a soft cloth.

Never use solvents or other harsh

chemicals for cleaning the non-metallic

parts of the tool. These chemicals may

weaken the plastic materials used in

these parts. Use a cloth dampened only

with water and mild soap.

Protecting the environment

Separate collection. This product

must not be disposed of with normal

household waste.

Should you ﬁnd one day that your D

EWALT product

needs replacement, or if it is of no further use to

you, do not dispose of it with household waste.

Make this product available for separate collection.

Separate collection of used products

and packaging allows materials to

be recycled and used again. Re-use

of recycled materials helps prevent

environmental pollution and reduces

the demand for raw materials.

Local regulations may provide for separate

collection of electrical products from the

household, at municipal waste sites or by the

retailer when you purchase a new product.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of DeWalt D25112C in the language / languages: English, German, Dutch, Danish, French, Italian, Portuguese, Swedish, Turkish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 1 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

DeWalt D25112C Manual

Product: