Manual DeWalt D21583K T-2 (page 39 of 156) (English, German, Dutch, Danish, French, Italian, Portuguese, Swedish, Turkish, Spanish, Norwegian, Finnish)

591334

Zoom out

Zoom in

1/156

ENGLISH

dampened only with water and mild

soap. Never let any liquid get inside the

tool; never immerse any part of the tool

into a liquid.

Optional Accessories

WARNING: Since accessories, other

than those offered by DEWALT, have

not been tested with this product, use

of such accessories with this tool could

be hazardous. To reduce the risk of

injury, only DEWALT, recommended

accessories should be used with this

product.

Consult your dealer for further information on the

appropriate accessories.

DUST EXTRACTION SYSTEM (FIG. 7)

The D27902 dust extractor (j) ensures a proper and

safe discharge of dust in all drilling applications.

WATER PUMP (FIG. 8)

Removing debris from the working area and cooling

the core bit in wet applications, the D215824 water

pump (l) ensures water supply where main water

supply is not available.

DRILL STAND (FIG. 1, 8)

The D215831 drill stand (k) allows your diamond drill

to be used in stationary applications for increased

accuracy, comfort and stability.

The D215832 water collection ring (m) is required

to accommodate the assembly for wet drilling

applications.

WARNING: DO NOT use the stand with

a vacuum pump on a wall or ceiling.

Protecting the Environment

Separate collection. This product must

not be disposed of with normal

household waste.

Should you ﬁnd one day that your D

EWALT product

needs replacement, or if it is of no further use to

you, do not dispose of it with household waste.

Make this product available for separate collection.

Separate collection of used products

and packaging allows materials to be

recycled and used again. Re-use of

recycled materials helps prevent

environmental pollution and reduces

the demand for raw materials.

Segments look glazed and polished

• Drill in abrasive material to re-expose diamond

segments.

Evacuated water too clear and too fluid

Water flow slows down the cutting action and

prevents the diamond segments to self-sharpen.

• Reduce water flow.

Dust accumulating in core bit

Accumulating dust slows down the drilling speed.

• Use the appropriate dust extraction device.

• Disengage drill bit regularly to evacuate cuttings.

Rotating speed not appropriate

• Refer to the technical data for proper speed

ratings.

Segments and core are burnt

• Increase water flow.

Segments wear too fast

• Choose a more appropriate core bit

(with harder segments).

• Reduce the pressure applied on the core bit.

Lubrication

Your power tool requires no additional lubrication.

Dust Extraction (dry operation)

WARNING: When performing a

dry cutting operation, connect a

dust extraction device designed in

accordance with the relevant regulations

regarding dust emissions.

Cleaning

WARNING: Blow dirt and dust out of

the main housing with dry air as often as

dirt is seen collecting in and around the

air vents. Wear approved eye protection

and approved dust mask when

performing this procedure.

WARNING: Never use solvents or

other harsh chemicals for cleaning the

non-metallic parts of the tool. These

chemicals may weaken the materials

used in these parts. Use a cloth

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of DeWalt D21583K T-2 in the language / languages: English, German, Dutch, Danish, French, Italian, Portuguese, Swedish, Turkish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 8,06 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

DeWalt D21583K T-2 Manual

Product: