Manual DeWalt D21583K T-2 (page 35 of 156) (English, German, Dutch, Danish, French, Italian, Portuguese, Swedish, Turkish, Spanish, Norwegian, Finnish)

591334

Zoom out

Zoom in

1/156

ENGLISH

Your diamond drilling machine can also be used for

wet drilling into engineered bricks, stone concrete

and reinforced concrete with wet diamond core bits

and a water supply.

The machine can be used handheld in applications

up to 100 mm for masonry or 72mm for concrete.

When drilling holes larger than 100 mm diameter

in masonry or 72mm diameter in concrete, the

machine must be used on a drill stand.

DO NOT use under wet conditions or in presence of

flammable liquids or gases.

These diamond drills are professional power tools.

DO NOT let children come into contact with the

tool. Supervision is required when inexperienced

operators use this tool.

• Young children and the infirm. This appliance

is not intended for use by young children or

infirm persons without supervision.

• This product is not intended for use by persons

(including children) suffering from diminished

physical, sensory or mental abilities; lack of

experience, knowledge or skills unless they are

supervised by a person responsible for their

safety. Children should never be left alone with

this product.

Torque Limiting Clutch

This tool is equipped with a torque limiting clutch

that reduces the maximum torque reaction

transmitted to the operator in case of jamming of

a drill bit. This feature also prevents the gearing and

electric motor from stalling. The torque limiting clutch

has been factory-set and cannot be adjusted.

Electronic Overload Protection

The electronic overload protection offers additional

safety: if the current approaches a certain limit,

the warning indicator LED (c) lights up to indicate

that the machine switches into overload mode if

operation is continued at the same pressure level.

Reduced operator pressure on the machine makes

the electronics switch back into normal mode.

If continuous overload pressure is applied, the

machine switches off. Thus, overheating of

the motor windings is avoided. The machine is

operational again after the load has been released.

Thermal Protection

After the machine has worked in overload for a

long period of time, the thermal protection shuts

off the machine to protect the motor. The machine

will be operational after the thermal protection has

cooled down. The time of cooling down depends

on the overheating of the motor and the ambient

temperature.

Package Contents

The package contains:

1 Diamond drilling machine

1 Side handle

1 Open ended spanner, 32 mm

1 Open ended spanner, 41 mm

1 Adaptor for dust extractor

1 Adaptor for water supply

1 Kitbox

1 Instruction manual

1 Exploded drawing

• Check for damage to the tool, parts or

accessories which may have occurred during

transport.

• Take the time to thoroughly read and

understand this manual prior to operation.

Description (ﬁ g. 1, 2)

WARNING: Never modify the power

tool or any part of it. Damage or

personal injury could result.

(FIG. 1)

a. Variable speed switch

b. Lock-on button

c. Overload warning indicator LED

d. Spindle

e. Side handle

f. Three gear selector

g. Combined water supply and dust extraction

fitting

h. Main handle

i. Portable residual current device (PRCD)

OPTIONAL ACCESSORIES (FIG. 2)

j. D27902 Dust extractor

k. D215831 Drill stand

l. D215824 Water pump

m. D215832 Water collection ring

(for use with D215831)

n. D215833 Spare seal for water collection

ring (3 pcs) (for use with

D215832)

INTENDED USE

Your D21583 diamond drilling machine has been

designed for dry drilling into masonry materials such

as brick, breezeblock, etc. with a dry diamond core

bit in conjunction with a vacuum device.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of DeWalt D21583K T-2 in the language / languages: English, German, Dutch, Danish, French, Italian, Portuguese, Swedish, Turkish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 8,06 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

DeWalt D21583K T-2 Manual

Product: