Manual DeWalt d 27902 (page 15 of 96) (English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Turkish, Spanish, Norwegian, Finnish)

321004

Zoom out

Zoom in

1/96

– 3

Caution

The flat pleated filter must must always be

in place while vacuuming.

– If wet dirt is vacuumed with the uphol-

stery or crevice nozzle, or if water is

sucked up from a container, it is recom-

mended to deactivate the "automatic fil-

ter cleaning" function.

– If the maximum liquid level is reached

the appliance will turn off automatically.

– In case of non-conductive liquids

(such as emulsion drilling fluids,

oils, and greases) the appliance is

not turned off when the container is

full. The filling level must be continu-

ously monitored and the container

must be emptied in time.

– After the wet vacuuming: Clean the flat

folded filter with the filter cleaning.

Clean the electrodes with a brush.

Clean the container with a damp rag

and dry it.

Illustration

The suction hose is equipped with a clip

system. All C-35/C-DN-35 accessories can

be connected.

 Plug in the main plug.

 Switch on the appliance at the main

switch.

 Set the suction output (min - max) at the

rotary switch.

Not applicable to the D27902-LX, 115V

version

ƽ Danger

Risk of injury and damage! The socket out-

let is only for the connection of power tools

to the vacuum cleaner. Any other use of the

socket outlet is not permitted.

 Connect the mains plug of the electric

power tool to the vacuum cleaner.

 Switch on the appliance at the main

switch.

Indicator lamp is on; vacuum cleaner is in

the standby mode.

Note: The vacuum cleaner is turned on and

off automatically with the electric power tool.

Note: The vacuum cleaner starts automat-

ically within 0.5 seconds and continues to

run for 15 seconds after the power tool has

being switched off.

Note: Please refer to "Technical specifica-

tions" for the power connection specifica-

tions of the power tools.

Illustration

 Adjust the stepped power tool adaptor

to fit the connection of the electric pow-

er tool.

Illustration

 Remove the elbow from the suction hose.

 Attach the stepped power tool adaptor

to the suction hose.

Illustration

 Connect the adaptor to the electric pow-

er tool.

The appliance has an innovative filter

cleaning system that is particularly effective

with fine dust. The flat pleated filter is auto-

matically cleaned every 15 seconds

through an air jet (pulsating sound).

Note: Automatic filter dedusting is switched

on at the factory.

Note: The automatic filter dedusting func-

tion can only be switched on/ off when the

appliance is switched on.

– To switch off automatic filter cleaning:

General

Clip connection

Operation

Turning on the Appliance

Adjust the suction output

Working with electrical power tools

Automatic filter cleaning

15EN

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of DeWalt d 27902 in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Turkish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 1,29 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

DeWalt d 27902 Manual

Product: