388804
24
Zoom out
Zoom in
Previous page
1/92
Next page
24
Unscrew the side handle clamp knob (9).
Slide the side handle assembly onto the machine
locating the steel ring (10) in the mounting area (X).
Adjust the side handle (3) to the desired angle.
Slide and rotate the side handle to the desired
position.
Lock the side handle in place by tightening the
clamp knob (9).
Instructions for use
Always observe the safety instructions
and applicable regulations.
Be aware of the location of pipework and
wiring.
Apply a pressure of approx. 20 - 30 kg
to the tool. Excessive force does not
speed up chiselling but decreases tool
performance and may shorten tool life.
Switching on and off (fig. A)
Switching on: set the on/off switch (1) to position 1.
Switching off: set the on/off switch (1) to position 0.
Demolition, chasing and channelling (fig. A)
Select the appropriate chisel, and clean and
grease its shank.
Insert the chisel and check whether it is properly
locked.
Fit and adjust the side handle (3) and make sure
it is firmly tightened.
Hold of the tool at both handles (2 & 3) and switch
on. The tool now runs in continuous operation.
Always switch off the tool when work is finished
and before unplugging.
Various types of 19 mm hex. chisels are available as
an option.
Consult your dealer for further information on the
appropriate accessories.
Maintenance
Your DEWALT Power Tool has been designed to
operate over a long period of time with a minimum
of maintenance. Continuous satisfactory operation
depends upon proper tool care and regular cleaning.
This machine is not user-serviceable. Take the
tool to an authorised DEWALT repair agent after
approximately 200 hours of use. If problems
occur before this time contact an authorised
DEWALT repair agent.
Lubrication
Your power tool requires no additional lubrication.
Cleaning
Keep the ventilation slots clear and regularly clean
the housing with a soft cloth.
Accessory maintenance
Accessory maintenance at the right time guarantees
optimal results in application and a long and efficient
accessory life.
Unwanted tools and the environment
Take your tool to an authorized DEWALT repair
agent where it will be disposed of in an
environmentally safe way.
ENGLISH
24


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for DeWalt d 25940 k at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of DeWalt d 25940 k in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Turkish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 0,82 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info