388883

DeWalt d 25114 k Manual

35
Zoom out
Zoom in
Previous page
1/140
Next page
35
E N G L I S H
- Insert the special SDS-plus® screwdriving
adaptor for use with hexagonal screwdriver
bits (D25112(C)K/D25113K/D25213K).
- Replace the tool holder with the chuck
(D25114K).
● Insert the appropriate screwdriver bit.
When driving slotted head screws always use
bits with a finder sleeve.
● Gently press the variable speed switch (1) to
prevent damage to the screw head. In reverse
(LH) rotation the tool speed is automatically
reduced for easy screw removal.
● When the screw is flush with the workpiece,
release the variable speed switch to prevent the
screw head from penetrating into the workpiece.
D25113K/D25114K/D25213K -
Chipping and chiselling (fig. A)
● Set the mode selector switch (4) to the
"hammering only" position.
● Insert the appropriate chisel and rotate it by
hand to lock it into one of 51 positions.
● Adjust the side handle (9) as required.
● Switch on the tool and start working.
● Always switch off the tool when work is finished
and before unplugging.
● Do not use this tool to mix or pump
easily combustible or explosive fluids
(benzine, alcohol, etc.).
● Do not mix or stir inflammable liquids
labelled accordingly.
Optional accessories
Various types of SDS-plus
®
drill bits and chisels
are available as an option.
Consult your dealer for further information on the
appropriate accessories.
Maintenance
Your DEWALT power tool has been designed to
operate over a long period of time with a minimum
of maintenance. Continuous satisfactory operation
depends upon proper tool care and regular
cleaning.
● This machine is not user-serviceable. Take the
tool to an authorised DEWALT repair agent after
approximately 40 hours of use.
If problems occur before this time contact an
authorised DEWALT repair agent.
● The tool will automatically switch off when the
carbon brushes are worn.
A
Lubrication
Your power tool requires no additional lubrication.
Accessories and attachments used must be
regularly lubricated around the SDS-plus
®
fitment.
S
Cleaning
Keep the ventilation slots clear and regularly clean
the housing with a soft cloth.
@
Never use solvents or other harsh
chemicals for cleaning the non-metallic
parts of the tool. These chemicals may
weaken the plastic materials used in
these parts. Use a cloth dampened only
with water and mild soap.
Protecting the environment
Z
Separate collection. This product
must not be disposed of with normal
household waste.
Should you find one day that your D
EWALT product
needs replacement, or if it is of no further use to
you, do not dispose of it with household waste.
Make this product available for separate collection.
z
Separate collection of used products
and packaging allows materials to
be recycled and used again. Re-use
of recycled materials helps prevent
environmental pollution and reduces
the demand for raw materials.
Local regulations may provide for separate
collection of electrical products from the
household, at municipal waste sites or by the
retailer when you purchase a new product.
… 35 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for DeWalt d 25114 k at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of DeWalt d 25114 k in the language / languages: English, German, Dutch, Danish, French, Italian, Portuguese, Swedish, Turkish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 1 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info