Manual DeWalt d 25113 k qs (page 30 of 140) (English, German, Dutch, Danish, French, Italian, Portuguese, Swedish, Turkish, Spanish, Norwegian, Finnish)

388887

Zoom out

Zoom in

1/140

E N G L I S H

4 Power tool use and care

a Do not force the power tool. Use the correct

power tool for your application.

The correct power tool will do the job better and

safer at the rate for which it was designed.

b Do not use the power tool if the switch does

not turn it on and off.

Any power tool that cannot be controlled with

the switch is dangerous and must be repaired.

c Disconnect the plug from the power source

and/or the battery pack from the power tool

before making any adjustments, changing

accessories, or storing power tools.

Such preventive safety measures reduce the

risk of starting the power tool accidentally.

d Store idle power tools out of the reach of

children and do not allow persons unfamiliar

with the power tool or these instructions to

operate the power tool.

Power tools are dangerous in the hands of

untrained users.

e Maintain power tools. Check for misalignment

or binding of moving parts, breakage of

parts and any other condition that may

affect the power tools operation. If damaged,

have the power tool repaired before use.

Many accidents are caused by poorly

maintained power tools.

f Keep cutting tools sharp and clean.

Properly maintained cutting tools with sharp

cutting edges are less likely to bind and are

easier to control.

g Use the power tool, accessories and tool bits

etc., in accordance with these instructions,

taking into account the working conditions

and the work to be performed.

Use of the power tool for operations different

from those intended could result in a hazardous

situation.

5 Service

a Have your power tool serviced by a

qualiﬁed repair person using only identical

replacement parts.

This will ensure that the safety of the power tool

is maintained.

Additional safety instructions for rotary

hammers

● Wear ear protectors.

Exposure to noise can

cause hearing loss.

●

Use auxiliary handles supplied with the tool.

Loss of control can cause personal injury.

●

Preferably wear a dust mask.

Chipping and chiselling

● Ensure the chisel is secured in place before

operating the tool.

● In cold-weather conditions or when the tool has

not been used for a longer period of time, let

the tool run with no load for several minutes

before use.

● Always hold the tool ﬁrmly with both hands and

ensure a secure stance. Always operate the

tool with the side handle properly mounted.

● When working above ground level ensure the

area below is clear.

● To prevent electric shock, check the working

area for live wires before operation.

● Do not touch the chisel or the parts close to the

chisel immediately after operation, as they may

be extremely hot and cause burns to the skin.

● Always direct the power cable to the rear,

away from the chisel.

Residual risks

The following risks are inherent to the use of rotary

hammers:

- injuries caused by touching the rotating parts or

hot parts of the tool

In spite of the application of the relevant safety

regulations and the implementation of safety

devices, certain residual risks cannot be avoided.

These are:

- Impairment of hearing.

- Risk of squeezing ﬁngers when changing the

accessory.

- Health hazards caused by breathing dust

developed when working in concrete and/or

masonry.

Package contents

The package contains:

1 Heavy duty rotary hammer drill

1 Side handle

1 Depth adjustment rod

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of DeWalt d 25113 k qs in the language / languages: English, German, Dutch, Danish, French, Italian, Portuguese, Swedish, Turkish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 1 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

DeWalt d 25113 k qs Manual

Product: