388762

DeWalt d 25103 k Manual

29
Zoom out
Zoom in
Previous page
1/112
Next page
29
ENGLISH
• Always switch off the tool when work is finished
and before unplugging.
Rotary drilling (fig. A)
• Set the mode selector switch (4) to the “rotary
drilling” position.
• Depending on your tool, follow either of the
following instructions:
- Fit the chuck adapter/chuck assembly
(D25102(K)/D25102C/D25103K/D25203K).
- Replace the tool holder with the chuck
(D25104K).
• Proceed as described for hammer drilling.
Never use standard chucks in the
hammer drilling mode.
Screwdriving (fig. A)
• Set the mode selector switch (4) to the “rotary
drilling” position.
• Select the direction of rotation.
• Depending on your tool, follow either of the
following instructions:
- Insert the special SDS-plus
®
screwdriving
adaptor for use with hexagonal screwdriver bits
(D25102(K)/D25102C/D25103K/D25203K).
- Replace the tool holder with the chuck
(D25104K).
• Insert the appropriate screwdriver bit.
When driving slotted head screws always use
bits with a finder sleeve.
• Gently press the variable speed switch (1) to
prevent damage to the screw head. In reverse
(LH) rotation the tool speed is automatically
reduced for easy screw removal.
• When the screw is flush with the workpiece,
release the variable speed switch to prevent the
screw head from penetrating into the workpiece.
D25103K/D25104K/D25203K - Chipping and
chiselling (fig. A)
• Set the mode selector switch (4) to the
“hammering only” position.
• Insert the appropriate chisel and rotate it by hand
to lock it into one of 51 positions.
• Adjust the side handle (9) as required.
• Switch on the tool and start working.
• Always switch off the tool when work is finished
and before unplugging.
• Do not use this tool to mix or pump
easily combustible or explosive fluids
(benzine, alcohol, etc.).
• Do not mix or stir inflammable liquids
labelled accordingly.
Various types of SDS-plus
®
drill bits and chisels are
available as an option.
Consult your dealer for further information on the
appropriate accessories.
Maintenance
Your DEWALT power tool has been designed to
operate over a long period of time with a minimum
of maintenance. Continuous satisfactory operation
depends upon proper tool care and regular cleaning.
• This machine is not user-serviceable. Take the
tool to an authorised DEWALT repair agent after
approximately 40 hours of use. If problems occur
before this time contact an authorised DEWALT
repair agent.
• The tool will automatically switch off when the
carbon brushes are worn.
Lubrication
Your power tool requires no additional lubrication.
Accessories and attachments used must be
regularly lubricated around the SDS-plus
®
fitment.
Cleaning
Keep the ventilation slots clear and regularly clean
the housing with a soft cloth.
Unwanted tools and the environment
Take your tool to an authorized DEWALT repair
agent where it will be disposed of in an
environmentally safe way.
… 29 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for DeWalt d 25103 k at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of DeWalt d 25103 k in the language / languages: English, German, Dutch, Danish, French, Italian, Portuguese, Swedish, Turkish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 0,67 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info