598711
14
Zoom out
Zoom in
Previous page
1/19
Next page
Appendix
|
|
devolo MicroLink 56k Fun II
|
14
EN
3.3 Frequently asked questions
This section provides solutions to problems regarding your MicroLink 56k Fun
II, which our support team has already worked through for other customers.
Question
How can I configure an analog modem for a private
branch exchange (PBX)?
The analog modem is connected to a PBX. A connection cannot be
established. Every time a dial sequence is run, the following messages are
displayed:
'Error 680: No dial tone'
'Error 678: The dialed computer is not answering' or 'Error 678: No
answer'
Cause
A PBX requires a number for accessing an outside line. Usually this is
specified with a single digit (0-9), while some systems use several digits or
the flash button. When you first setup your Internet connection, Windows
prompts you to enter this number in the 'General Information'. Even if the
number for accessing an outside line is entered, problems can occur when
trying to establish a connection. If this is the case, check the following
settings:
Solution (1. disable
dial tone detection)
With the Windows standard configuration, the modem waits for a
dial tone before dialing. This function has to be disabled.
Windows 98
Under My Computer Dial-Up Networking, click the dial-up connection
you have created with the right mouse button. Under the 'Properties' entry,
click Configure. On the 'Settings' tab, disable the 'Wait for dial tone before
dialing' option.
Windows Me
Under Start Settings Dial-Up Networking, select your dial-up
connection using the right mouse button. Under the 'Properties' entry, click
Configure. On the 'Connection' tab, disable the 'Wait for dial tone before
dialing' option.
Windows 2000
Click Start Settings Control Panel Phone and Modems Options.
On the 'Modems' tab, select your modem. Click on Properties. On the
'General' tab, disable the 'Wait for dial tone before dialing' option.
14


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Devolo MicroLink 56k Fun II at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Devolo MicroLink 56k Fun II in the language / languages: English as an attachment in your email.

The manual is 0,62 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Devolo MicroLink 56k Fun II

Devolo MicroLink 56k Fun II User Manual - German - 20 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info