4.4 Tow couplings
4.4.1 WS 3000 D stabiliser
Connecting:
Pull the coupling handle (Fig. 1,1) upwards to the "open" position (Fig. 1,2). The
stabiliser is opened.
Place the stabiliser on the towing vehicle towing ball and release the coupling
handle. The handle glides automatically back to its initial position (Fig. 1,3).
In addition, push the coupling handle down with your hand (not with your
foot). Closing and securing is carried out automatically.
Conduct a visual inspection: The caravan ball must not be visible in the attached
state.
Activate the stabilising mechanism. To do so, press the coupling handle from
the closed position (Fig. 1,3) downwards as far as it will go (Fig. 1,4).
In order to deactivate the stabilising device, e.g. for manouevring, pull the coupling
handle (Fig. 1,1) slowly upwards to the closed position (Fig. 1,3).
Z Before connecting, ensure that the tow ball of the coupling device is free of dirt
and grease.
Fig. 1 WS 3000 D stabiliser
