Manual Derby Cycle Pedelec Xion 2013 (page 49 of 259) (English, German, Dutch, French, Italian, Spanish)

658408

Zoom out

Zoom in

1/259

16 VIII User Manual Pedelec Xion

5.2.3 Battery charge state indicator

The battery charge state indicator is located to the right of

the centre of the display. Using a stylised battery divided

into four segments, it shows the charge remaining in the

battery. The lower the charge state of the battery is, the

fewer segments are displayed.

If the battery charge state falls below a minimum level,

the assistance switches o via the motor. The display

remains active until the battery reaches the lowest pos-

sible charge state.

If you do not move your Pedelec for 10 minutes, the sys-

tem switches o automatically. If you subsequently want

to ride using the assistance, you will have to switch it

back on using the diamond button.

5.2.4 Remaining range indicator

To the right of the display of the power-assist mode, the

distance inkm over which you can still travel with power

assist is displayed. This is the remaining range indicator.

This “remaining range” is calculated using two meas-

urements taken during the current journey. One short

and one long measurement give a representative av-

erage value. If the conditions of the journey change,

for example, by riding up an incline aer a long, at

stretch, the value displayed can also change at short

notice. Please consider this factor when planning your

trips. You are probably familiar with this eect om

the remaining range indicator of your car.

Charge state indicator

1 Battery ll

2 Battery almost empty

5.2.5 Pushing assistance

First of all, pushing assistance must be activated in

programming mode (➠ Chapter 5.4.4 “Pushing assis-

tance”).

To activate the pushing assistance, press and hold the

upper arrow button. To receive no rther pushing assis-

tance, release the button.

5.3 Troubleshooting

If your bike has been exposed to wet conditions for

an extended period, e.g. aer a trip in heavy rain, or

if there have been large dierences in temperature,

the screen of the display may steam up. This mois-

ture does not impair the nction of the display. It is

comparable with the steam on a pair of glasses when

you enter a warmer room having been outside. Aer

a short time in drier and warmer conditions, this con-

densation will vanish leaving no trace.

Error messages do not appear on the entire screen, but

rather in place of the battery display on the right-hand

side. All symbols remain permanently visible, with the

exception of the “Inspection due” symbol.

SYMBOL CAUSE SOLUTION

Battery almost

empty.

• Recharge your

battery.

Inspection due. • Consult your spe-

cialist cycle shop.

Temperature is

too high. The

motor is too hot.

• Allow your system

to cool down.

A fault has

occurred in the

system.

• Please contact

your specialist

cycle shop.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Derby Cycle Pedelec Xion 2013 in the language / languages: English, German, Dutch, French, Italian, Spanish as an attachment in your email.

The manual is 19,8 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Derby Cycle Pedelec Xion 2013 Manual

Product: