Manual Derby Cycle Pedelec Xion 2013 (page 45 of 259) (English, German, Dutch, French, Italian, Spanish)

658408

Zoom out

Zoom in

1/259

12 VIII User Manual Pedelec Xion

2. Grip the battery with both hands and li it forwards/

upwards out of its holder. In doing so, hold on tight to

the battery to prevent it om being dropped. Place the

battery down on a suitable surface. This should be dry,

even and non-ammable.

3. You should now remove the key and keep it in a safe

place to prevent it om breaking o or being lost.

4.2 Learning cycle

Aer lly charging the battery for the rst time and

thereaer roughly once every six months, you must run

the battery down until the system switches o. This

procedure (a so-called “learning cycle”) is necessary

so that the battery management recognises the chang-

es in the capacity caused by age and wear and tear,

in other words, the performance level of the battery.

Aerwards, the capacity of the battery is calculated

anew and correctly represented. This also allows the

remaining range display to nction with greater preci-

sion. With this procedure, you can prevent a sudden

loss of electrical assistance during an extended trip.

Removing the battery

4.3 Charging operation

Before charging the battery, read the information on

the charger carelly.

1. Take the charger provided out of its packaging and

plug the mains plug into a socket (110 to 230V, please

observe type plate on the charger). To charge the bat-

tery safely, the charger must be placed on a suitable

surface. This should be dry and non-ammable.

2. Connect the plug of the charger to the battery. When

positioned correctly, the plug is held in the socket by a

magnet.

3. The charging process begins. The LED on the charger

lights up red. The battery is charged in ve stages.

When charging of one stage is in progress, the cor-

responding LED ashes. If this stage has been lly

charged, the LED will light up permanently. Now the

next LED will begin to ash. Aer all ve LEDs have

gone out, the battery is lly charged.

4. If the LED on the charger ashes red permanently, a

charging fault has developed. In that case, disconnect

the battery om the charger, then connect it again. The

charger tests the battery and performs readjustments,

if required. If the LED on the charger still ashes, take

the charger and battery to your specialist dealer who

will test the device and replace it, if required.

5. To save power, pull the charger plug out of the socket

once the charging operation is complete.

Charging the battery

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Derby Cycle Pedelec Xion 2013 in the language / languages: English, German, Dutch, French, Italian, Spanish as an attachment in your email.

The manual is 19,8 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Derby Cycle Pedelec Xion 2013 Manual

Product: