Manual Derbi GPR 50cc 6 Speed Engine (page 54 of 71) (English)

531765

Zoom out

Zoom in

1/71

- Proceed to strip down the secon-

dary shaft completely, extracting the

assembly securing circlip, and then

proceeding to separate all the pie-

ces of the assembly in an orderly

fashion. Spread out a clean cloth

and place the parts on this cloth as

they are stripped down.

- Check that there is no burring or

signs of irregular wear on the studs

and slots in the gear change locking

system in the sliding gears or on

their striations.

- Check the condition of wear of the

rotation bushes in the free gears on

the secondary shaft.

- If they show signs of damage over

more than 25% of their surface,

replace them. The fixed locating cir-

clips in the assembly should also be

replaced.

- Check also the secondary shaft

needle bearings. Replace them if

they show signs of damage.

12-5

Were does the vacuum pipe from the tank conect to on the carburettor Submitted on 24-3-2022 at 09:43
Reply Report abuse

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Derbi GPR 50cc 6 Speed Engine in the language / languages: English as an attachment in your email.

The manual is 1,74 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Derbi GPR 50cc 6 Speed Engine Manual

Product: