531764
102
Zoom out
Zoom in
Previous page
1/145
Next page
101
Checking the brake calliper main cylinder:
- Check that the anti-dust boots are not damaged.
If they are, change them.
- Check that the piston return is not damaged. If it is, renew it.
- Check that the relief port and feed port are not blocked.
if the relief port is blocked, the brake pads will bind on the
disk. Inject compressed air to clean the ports.
Extracting the brake disk:
- Remove the front wheel.
- Unscrew the mounting bolts and extract the disk.
Fitting the brake disk
- Fit the brake disk onto the front wheel so that side (2) faces
outwards.
- Apply a temporary blocking device to the threads of the
brake disk mounting bolts(1).
- Tighten the front brake disk mounting bolts(1).
Nominal tightening torque:
1,0 ~ 1,2 Kgf.m (10 ~ 12 N.m)
Wear to the brake disk:
- Measure the thickness of the disks (A) at the point where
they are most worn.
- If the disk is more worn than specified in the service limit,
renew it.
Measurement area (B).
Standard thickness of the front brake disk.
3,8 ÷ 4,1 mm
Service limit:
3,50 mm
102


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Derbi GPR 125 cc Racing at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Derbi GPR 125 cc Racing in the language / languages: English as an attachment in your email.

The manual is 6,47 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info