646678

DePaepe Progress Manual

13
Zoom out
Zoom in
Previous page
1/20
Next page
EN 49/79
Installation
Base
1. Connect the modular end of the AC power adapter to the
power jack of the base, and then plug the AC adapters into
a standard AC wall outlet.
2. Connect one end of the phone line cord to the phone line
jack of the base, and the other end to a standard phone wall
outlet.
This terminal is designed to be connected to the main power 100/240V 50/60Hz through
a power adapter supplied with the unit and to the analog telephone network TNV3 as
defined in standard EN 60950 amendments 1 to 11.
EN 50/79
Handset
The rechargeable Ni-MH batteries (AAA size,
1.2V, 600mAh) come with your phone. Install
the batteries before use.
- Slide the battery cover in the direction of the
arrow and pull it out.
- Insert new batteries as indicated, matching correct polarity (+,-).
When replacing the batteries, always use good quality Ni-MH re-chargeable batteries.
Never use other batteries or conventional alkaline batteries.
Before initial operation, you should fully charge the handset for about 15 hours.
To charge the handset, you should place it on the base. When you place the handset on
the base, the handset automatically turns on.
To turn the handset on, press and hold the key until the display is switched on.
To turn off the handset, keep the
key pressed until the display disappears.
EN 51/79
Basic functions
Making a Call
- Pick up the handset and press the key, the icon appears on LCD.
- Dial the telephone number.
- To end the call, press the
key.
Predialing: You can enter the desired phone number in standby mode, which allows you
to make corrections before dialing. Enter a telephone number (up to 32 digits). Check it.
You can also use the
key to insert a pause. When the number appears correctly,
press the
key.
Receiving a call
When a call is received, the "New Call" information will appear on the LCD.
If the caller can be identified, the caller's phone number is displayed. If the caller cannot
be identified, only the "New Call" information displays.
EN 52/79
To answer the call, press the
key. If you have activated the Auto Answer function
(see page 72), when the handset is on the base, simply lift it up to answer.
Ringer volume: You can select the ringer volume by using the
or key when the
phone rings with an incoming call.
Adjusting Voice Volume
During a conversation, you can use the or key to adjust the level of the earpiece
(or the handsfree speakerphone one, if activated) volume from V.1 to V.5. The selected
volume will be displayed on the LCD.
You can also select the earpiece volume or the speaker volume by the Audio Setup in
Menu under HS Settings, as described in page 69.
Handsfree
During a call, you may turn on the speakerphone built in the handset. Press the
key, the
icon appears on the LCD. To turn the feature off, press the key again
and the
icon will disappear.
… 13 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for DePaepe Progress at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of DePaepe Progress in the language / languages: English, French as an attachment in your email.

The manual is 0,6 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info