646679

DePaepe Platine HD Manual

14
Zoom out
Zoom in
Previous page
1/23
Next page
Settings programming
Note : HD securit standard factory settings come with :
- Programming access code = 0000
- Dialling = Tone
- Hook-Flash duration = 270 ms
- Pulse mark-break ratio = 66/33
- Access to memory programming = unlocked
- Call barring = unlocked
To change settings, proceed as follows :
1) Make sure the telephone is connected to a powered C.O. or PABX line.
2) Turn the handset as shown on Fig3 with the microphone side of the handset
resting on the base. Depress « PGR » located inside the unit (see Fig1).
3) While keeping « PGR » key depressed , pick-up the handset .
4) Release « PGR » key.
5) 2 sharp « beep » tones will confirm entering the settings programming mode.
6) Enter the 4 digits programming access code with the keypad or with the rubber
keys located inside the keypad grid (factory pre set code is : 0000)
This code can be modified (see « LIST OF SETTINGS » section, pages 20-21).
7) If the right code is entered, 2 short « beep » tones will be heard and the access
to setting, changes will be authorized.
If a wrong code is entered, a low « beep » tone will be heard and the unit will
return to talk mode.
8) Enter the 2 digits selected setting access code (see « LIST OF SETTINGS »
section pages 20-21)
9) 2 sharp « beep » tones confirming the selection will be heard.
10) Enter your custom setting choice or the code or number to store.
11) Terminate your setting by depressing « PGR » key.
12) 2 sharp « beep » tones will confirm the storage of your new setting.
13) For other settings, proceed with operations 2 up to 11.
Reset général
Permet la remise a zéro des mémoires, du code et de tous les paramètres pour un
retour à la configuration par défaut en sortie usine.
1) Vérifier que le poste est raccordé à une ligne téléphonique.
2) Positionner le combiné à 90° avec la partie microphone dans son socle
(Voir Fig 3). Appuyer sur la touche « RES » voir Fig1.
3) Tout en maintenant l’appui sur « RES », décrocher le combiné.
4) Double bip de validation dans le combiné.
5) Relâcher la touche « RES ».
6) Composer le code de reset général : « 1-5-9 ». 16
… 14 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for DePaepe Platine HD at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of DePaepe Platine HD in the language / languages: English, French as an attachment in your email.

The manual is 0,72 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info